How to Service and Repair a Pilot Bearing on 2001 Jeep Wrangler?

To service the pilot bearing, remove the transmission, clutch cover and disc. Use an internal puller to remove the pilot bearing. Lubricate the new bearing with Mopar grease, use a clutch alignment tool to install and seat the bearing. Clean the flywheel, and then re-install the clutch and transmission.

OEM 2001 Jeep Wrangler Pilot Bearing

Clutch Pilot Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Pilot Bearing found

View related parts
2001 Jeep Wrangler Pilot Bearing Part Number: 53009180AB
$32.31 MSRP: $42.00
You Save: $9.69 (24%)
ADD TO CART
Product Specifications
- Other Name: Sleeve - Pilot; Multi-Purpose Bearing; Needle Bearing; Pilot Bearings; Bearing Pilot For 2.5 Engine, Serviced In Flywheel; Bearing Pilot Manual Transmission; Bearing Pilot
- Replaces: 53009180
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53009180AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Renegade, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2001 Jeep Wrangler Pilot Bearing Parts and Q&A

Q: How to Service and Repair a Pilot Bearing on 2001 Jeep Wrangler?
A: To service the pilot bearing, remove the transmission, clutch cover and disc. Use an internal puller to remove the pilot bearing. Lubricate the new bearing with Mopar grease, use a clutch alignment tool to install and seat the bearing. Clean the flywheel, and then re-install the clutch and transmission.