How to Service a Rocker Arm Assembly on 2002 Chrysler Sebring?

Opening the cylinder head cover(s) is the first step for rocker arm assembly service. Rotate the engine using the crankshaft every time to prevent valve and piston damage. Turn the engine until the cam lobe is on the bottom of the circle for the rocker arm you are removing and only press down on the valve spring with Special Tools 8215-A and 8216-A Adapter instead of lifting it completely. Remove the rocker arm from the cylinder head and make sure you mark which rocker arm goes where, if you are going to reuse them. Examine all rocker arms for damage or your cam follower assembly for any problems and replace the parts when they are needed. Rocker arm installation means you apply clean engine oil to the arms, then turn the engine so its cam lobe is located at the center line of the arm's motion. Depress the valve spring with Special Tool 8215-A, install the rocker arm in place and secure it with Special Tool 8216-A Adapter to be certain it connects with the lash adjusters and valve tips before taking away the tension from the valve spring. Perform these steps on every rocker arm being replaced and after that, reinstall each cylinder head cover.

OEM 2002 Chrysler Sebring Rocker Arm

Engine Rocker Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Rocker Arms found

View related parts
2002 Chrysler Sebring Rocker Arms Part Number: MD167981
$14.57 MSRP: $26.80
You Save: $12.23 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Rocker Arm; Intake Rocker Arm; Arm, Inlet Valve Rocker (Front Valve); Rocker Arm Intake
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.7 x 1.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD167981
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- Base, JX, JXi, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
2002 Chrysler Sebring Rocker Arms Part Number: MD178782
$21.00 MSRP: $42.45
You Save: $21.45 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Exhaust; Rocker Arm; Exhaust Rocker Arms; Arm, Exhaust Valve Rocker; Rocker Arm Exhaust
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD178782
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Chrysler Sebring Submodels:
- Base, JX, JXi, LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
2002 Chrysler Sebring Rocker Arms Part Number: MD167980
$15.94 MSRP: $32.20
You Save: $16.26 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Intake; Intake Rocker Arm; Arm, Inlet Valve Rocker (Rear Valve); Rocker Arm Intake
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD167980
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Chrysler Sebring Submodels:
- Base, JX, JXi, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
2002 Chrysler Sebring Rocker Arms Part Number: 4884042AA
Product Specifications
- Other Name: Arm - Valve; Rocker Arm Valve Roller; Rocker Arm Valve
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884042AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- Base, JX, JXi, LX | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2002 Chrysler Sebring Rocker Arms Part Number: 4792295AB
Product Specifications
- Other Name: Arm - Valve; Rocker Arm; Rocker Arm Inlet And Exhaust Valve
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792295AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2002 Chrysler Sebring Rocker Arm Parts and Q&A

Q: How to Service a Rocker Arm Assembly on 2002 Chrysler Sebring?
A: Opening the cylinder head cover(s) is the first step for rocker arm assembly service. Rotate the engine using the crankshaft every time to prevent valve and piston damage. Turn the engine until the cam lobe is on the bottom of the circle for the rocker arm you are removing and only press down on the valve spring with Special Tools 8215-A and 8216-A Adapter instead of lifting it completely. Remove the rocker arm from the cylinder head and make sure you mark which rocker arm goes where, if you are going to reuse them. Examine all rocker arms for damage or your cam follower assembly for any problems and replace the parts when they are needed. Rocker arm installation means you apply clean engine oil to the arms, then turn the engine so its cam lobe is located at the center line of the arm's motion. Depress the valve spring with Special Tool 8215-A, install the rocker arm in place and secure it with Special Tool 8216-A Adapter to be certain it connects with the lash adjusters and valve tips before taking away the tension from the valve spring. Perform these steps on every rocker arm being replaced and after that, reinstall each cylinder head cover.