How to Service and Repair the ABS Control Module on 2002 Chrysler Voyager?

Disconnect the battery terminals and take out the battery before working on the Controller Antilock Brake. After that, take the vacuum line off the tank fitted into the battery tray and unscrew the coolant neck from the tray. After that, take out the battery tray. After pulling up on the CAB lock, separate the 24-way connector and then break the link between the pump/motor and the CAB connector. Unscrew the CAB from the HCU and pull it straight off the mount. To install the CAB, just slide it on top of the HCU, insert the screws and tighten them to 2 Nm (17 in lbs). Restore both the 24-way wiring connector and the pump or motor wiring connector. Insert the plastic battery tray into the hole in the hood's hinged piece and secure it with the coolant filler neck screw. Fit the vacuum hose back to the coolant tank in the battery tray, secure the battery and attach both battery cables.

OEM 2002 Chrysler Voyager ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Control Modules found

View related parts
2002 Chrysler Voyager Modulator Valve Part Number: 5018252AA
Product Specifications
- Other Name: Accumulator - Anti-Lock Brake System; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Hydraulic Control Unit Anti-Lock Brake System
- Item Weight: 5.10 Pounds
- Item Dimensions: 7.3 x 7.0 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5018252AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Voyager Submodels:
- Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2002 Chrysler Voyager Modulator Valve Part Number: 5018253AA
Product Specifications
- Other Name: Accumulator - Anti-Lock Brake System; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Hydraulic Control Unit Anti-Lock Brake System
- Item Weight: 6.20 Pounds
- Item Dimensions: 7.3 x 7.2 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5018253AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Voyager Submodels:
- Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2002 Chrysler Voyager Control Module Part Number: 5093986AA
Product Specifications
- Other Name: Control - Anti-Lock Brakes; ABS Control Module; Electronic Control; Module Anti-Lock Brakes With Mounting Screws; Module Anti-Lock Brakes
- Replaces: 5086174AA
- Item Weight: 2.00 Pounds
- Item Dimensions: 5.8 x 4.7 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093986AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Voyager Submodels:
- Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2002 Chrysler Voyager Control Module Part Number: 5093988AA
Product Specifications
- Other Name: Control - Anti-Lock Brakes; ABS Control Module; Electronic Control; Module Anti-Lock Brakes With Mounting Screws; Module Anti-Lock Brakes
- Replaces: 5086175AA
- Item Weight: 2.10 Pounds
- Item Dimensions: 5.8 x 4.4 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093988AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Voyager Submodels:
- Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2002 Chrysler Voyager ABS Control Module Parts and Q&A

Q: How to Service and Repair the ABS Control Module on 2002 Chrysler Voyager?
A: Disconnect the battery terminals and take out the battery before working on the Controller Antilock Brake. After that, take the vacuum line off the tank fitted into the battery tray and unscrew the coolant neck from the tray. After that, take out the battery tray. After pulling up on the CAB lock, separate the 24-way connector and then break the link between the pump/motor and the CAB connector. Unscrew the CAB from the HCU and pull it straight off the mount. To install the CAB, just slide it on top of the HCU, insert the screws and tighten them to 2 Nm (17 in lbs). Restore both the 24-way wiring connector and the pump or motor wiring connector. Insert the plastic battery tray into the hole in the hood's hinged piece and secure it with the coolant filler neck screw. Fit the vacuum hose back to the coolant tank in the battery tray, secure the battery and attach both battery cables.