Other Name: Accumulator - Anti-Lock Brake System; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Hydraulic Control Unit Anti-Lock Brake System
Item Weight: 5.10 Pounds
Item Dimensions: 7.3 x 7.0 x 6.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5018252AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2003 Chrysler Voyager Submodels:
Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
Other Name: Accumulator - Anti-Lock Brake System; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Hydraulic Control Unit Anti-Lock Brake System
Item Weight: 6.20 Pounds
Item Dimensions: 7.3 x 7.2 x 6.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5018253AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2003 Chrysler Voyager Submodels:
Base, Ec, LX | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
Other Name: Control - Anti-Lock Brakes; ABS Control Module; Electronic Control; Module Anti-Lock Brakes With Mounting Screws; Module Anti-Lock Brakes
Replaces: 5086175AA
Item Weight: 2.10 Pounds
Item Dimensions: 5.8 x 4.4 x 2.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5093988AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2003 Chrysler Voyager Submodels:
Base, Ec, LX | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
2003 Chrysler Voyager ABS Control Module Parts and Q&A
Q: How to Service and Repair the ABS Control Module for Antilock Brakes on 2003 Chrysler Voyager?
A: Remove the Intercooler/Pump (ICU) and unplug the pump/motor wiring from the Control Area Body (CAB) before repairing or servicing the Hydraulic Control Assembly for Antilock Brakes. Then, untighten the 4 bolts holding the CAB onto the HCU and set the CAB aside. To assemble, fit the CAB onto the HCU and hold it in place with the 4 bolts, tightening each to a torque of 2 Nm (17 in. lbs.). Attach the pump/motor wiring harness to the CAB again, install the ICU inside the vehicle and bleed the base and ABS hydraulic systems.