JeepParts
My Garage
My Account
Cart
OEM 2002 Dodge Dakota Piston Ring Set
Piston Ring- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Piston Ring Sets found
2002 Dodge Dakota Piston Rings Part Number: 5012364AE
Product Specifications- Other Name: Package Part - Piston; Piston Ring; Ring Package Piston Standard Size; Ring Kit Piston Standard
- Replaces: 5012364AC, 5012364AD
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.3 x 4.2 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5012364AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Dodge Dakota Piston Rings Part Number: 4720653
Product Specifications- Other Name: Ring Package - Piston; Engine Piston Ring Set; Piston Ring Set; Piston Ring; Ring Set, Piston - Standard To .009" Outside 1990-91; Complete Engine Standard Size.
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4720653
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Dodge Dakota Piston Rings Part Number: 4798324
Product Specifications- Other Name: Ring Package - Piston; Piston Ring; Piston Ring Set; Ring Package Piston Standard Size Complete Engine; Ring Package, Engine
- Item Weight: 1.10 Pounds
- Item Dimensions: 12.7 x 10.4 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4798324
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Dodge Dakota Piston Rings Part Number: 4740259
Product Specifications- Other Name: Ring - Piston; Engine Piston Ring Set; Piston Ring Set; Piston Ring; Ring Set, Piston; Ring Piston
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4740259
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Dodge Dakota Piston Ring Set Parts and Q&A
- Q: How to Properly Install a Piston Ring Set on 2002 Dodge Dakota?A: Before measuring, move the piston ring 2 inches from the bottom of the bore and use an inverted piston to fit the rings squarely before you measure the gap. The range for the top compression ring is 0.254 - 0.508 mm (0.010 - 0.020 inch), for the second compression ring it is 0.508 - 0.762 mm (0.020 - 0.030 inch) and for the oil ring it is 0.254 - 1.270 mm (0.010 - 0.050 inch). If the end gap is too small, rings can be adjusted by filing, but if you find too many gaps you are better off not using these. When putting in the oil control rings, avoid harming the piston and make certain to install the oil rail spacer first, along with the side rails, then the upper and lower rails using hand pressure. With marking facing up and the chamfer facing you, use installation tool C-4184 to add the second compression rings. Install the top chamfer onto the top housing with the identification mark facing up and with the chamfer-facing-up part of the module up also. The distance between the piston ring and the ring land in all directions, called the side clearance, should be 0.074 - 0.097 mm (0.0029 - 0.0038 inch) for the compression rings, 0 mm for the steel rail oil ring, not exceeding 0.246 mm (0.0097 inch). Make sure that the top compression ring faces downward 90° from the oil ring and that the second compression ring faces upward 90° from it.
Related 2002 Dodge Dakota Parts
2002 Dodge Dakota Cylinder Head
2002 Dodge Dakota Crankshaft Pulley
2002 Dodge Dakota Dipstick
2002 Dodge Dakota Engine Mount
2002 Dodge Dakota Engine Mount Bracket
2002 Dodge Dakota Harmonic Balancer
2002 Dodge Dakota Oil Filler Cap
2002 Dodge Dakota Rocker Arm Pivot
2002 Dodge Dakota Rod Bearing
2002 Dodge Dakota Timing Cover
2002 Dodge Dakota Timing Cover Gasket
2002 Dodge Dakota Valve Stem Seal