JeepParts
My Garage
My Account
Cart
OEM 2002 Dodge Dakota Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Throttle Bodies found
2002 Dodge Dakota Throttle Body Part Number: 53032691AA
Product Specifications- Replaces: 53030807AB, 53031733AA
- Item Weight: 3.40 Pounds
- Item Dimensions: 12.0 x 9.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032691AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Dodge Dakota Throttle Body Part Number: 53031806AB
Product Specifications- Item Weight: 3.80 Pounds
- Item Dimensions: 12.0 x 9.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53031806AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Dodge Dakota Throttle Body Part Number: 53013163AD
Product Specifications- Replaces: 53013163AC, 53013163AB
- Item Weight: 2.70 Pounds
- Item Dimensions: 12.6 x 9.2 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53013163AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Dodge Dakota Throttle Body Parts and Q&A
- Q: How to Service and Repair a Throttle Body on 2002 Dodge Dakota?A: Galvanize by taking off the air duct from the throttle body before service or repair, Take out the electrical sockets for the throttle body from the MAP sensor, IAC motor and TPS. Next, take out the vacuum line at the throttle body and disconnect every control cable from the throttle body lever arm, following the instructions found in the Accelerator Pedal and Throttle Cable section. Take out the four throttle bolts and take the throttle assembly out of the intake manifold, removing the old gasket when you do. Before installing, clean the areas between the throttle body and the intake manifold and apply a new gasket. Install the throttle body onto the intake manifold and bolt it down with four bolts, tightening them to 23 Nm (200 in. lbs.) torque. Place the control cables, vacuum line and all electrical connections, after that return the air duct to the throttle body.
Related 2002 Dodge Dakota Parts
2002 Dodge Dakota Fuel Pump
2002 Dodge Dakota Air Filter
2002 Dodge Dakota Fuel Injector
2002 Dodge Dakota Fuel Sending Unit
2002 Dodge Dakota Gas Cap
2002 Dodge Dakota Intake Manifold
2002 Dodge Dakota Cruise Control Switch
2002 Dodge Dakota Fuel Tank Strap
2002 Dodge Dakota Accelerator Cable
2002 Dodge Dakota Air Intake Coupling
2002 Dodge Dakota Fuel Filler Neck
2002 Dodge Dakota Throttle Cable