How to Service and Repair a Throttle Body on 2003 Dodge Dakota?

Start by pulling off the air duct at the throttle body, then unplug the electrical connectors to the MAP sensor, IAC motor and TPS on the throttle body. After that, take out the vacuum line from the throttle body and remove all cables from its lever arm. When that's done, unbolt all four bolts holding the throttle body and take the throttle body from the intake manifold, removing the old throttle body gasket. Gather the throttle body, gasket and intake manifold. Clean, gasket and fit the throttle body over the intake manifold. Secure the device using the four mounting bolts and tighten each to 23 N.m (200 in.lbs.). Attach the control cables, vacuum line and electrical connectors next and put the air duct onto the throttle body.

OEM 2003 Dodge Dakota Throttle Body

Fuel Injection Throttle Body

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Throttle Bodies found

View related parts
2003 Dodge Dakota Throttle Body Part Number: 5114397AA
Product Specifications
- Item Weight: 2.20 Pounds
- Item Dimensions: 12.4 x 7.7 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5114397AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Dakota Submodels:
- Base, Laramie, SLT, SLT Plus, ST, Sport, Sport Plus | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2003 Dodge Dakota Throttle Body Part Number: 53032691AA
Product Specifications
- Replaces: 53030807AB, 53031733AA
- Item Weight: 3.40 Pounds
- Item Dimensions: 12.0 x 9.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032691AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Dakota Submodels:
- R/T, SLT, Sport | 5.2L V8, 5.9L V8, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Dakota Throttle Body Part Number: 53031806AB
Product Specifications
- Item Weight: 3.80 Pounds
- Item Dimensions: 12.0 x 9.4 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53031806AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Dakota Submodels:
- Base, SLT, SXT, Sport | 6 Cyl 3.9 L GAS

2003 Dodge Dakota Throttle Body Parts and Q&A

Q: How to Service and Repair a Throttle Body on 2003 Dodge Dakota?
A: Start by pulling off the air duct at the throttle body, then unplug the electrical connectors to the MAP sensor, IAC motor and TPS on the throttle body. After that, take out the vacuum line from the throttle body and remove all cables from its lever arm. When that's done, unbolt all four bolts holding the throttle body and take the throttle body from the intake manifold, removing the old throttle body gasket. Gather the throttle body, gasket and intake manifold. Clean, gasket and fit the throttle body over the intake manifold. Secure the device using the four mounting bolts and tighten each to 23 N.m (200 in.lbs.). Attach the control cables, vacuum line and electrical connectors next and put the air duct onto the throttle body.