How to Remove and Install the Intake Manifold Temperature Sensor on 2002 Dodge Durango?

An IMT sensor is placed in the intake manifold plenum, positioned towards the left side of the throttle body. Begin by unplugging the lead from the sensor and then take out the sensor from the machine's intake manifold. Always begin by separating the electrical connector from the IMT sensor and wiping clean the intake manifold at its base for the snap-in sensor type. Using light pressure on the plastic tab and rotating the sensor counterclockwise should remove it, as you check the O-ring. For this kind of sensor, install it into the opening in the intake manifold and tighten it to 28 Nm (20 ft. lbs.) before adding the sensor wiring again. With a snap-in type sensor, move the sensor about until you hear the snap and then gently rotate the tab.

OEM 2002 Dodge Durango Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intake Manifold Temperature Sensors found

View related parts
2002 Dodge Durango Temperature Sensor Part Number: 56028364AA
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Air Intake Temperature Sensor; Duct Air Temperature Sensor.
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028364AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Durango Submodels:
- Adventurer, Base, Limited, Limited Hybrid, SE, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2002 Dodge Durango Air Temperature Sensor Part Number: 56027872
$38.87 MSRP: $57.85
You Save: $18.98 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Engine Intake Manifold Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; Temperature Sending Unit; Sensor Ambient Temperature; Sensor Air Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.9 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027872
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2002 Dodge Durango Intake Manifold Temperature Sensor Parts and Q&A

Q: How to Remove and Install the Intake Manifold Temperature Sensor on 2002 Dodge Durango?
A: An IMT sensor is placed in the intake manifold plenum, positioned towards the left side of the throttle body. Begin by unplugging the lead from the sensor and then take out the sensor from the machine's intake manifold. Always begin by separating the electrical connector from the IMT sensor and wiping clean the intake manifold at its base for the snap-in sensor type. Using light pressure on the plastic tab and rotating the sensor counterclockwise should remove it, as you check the O-ring. For this kind of sensor, install it into the opening in the intake manifold and tighten it to 28 Nm (20 ft. lbs.) before adding the sensor wiring again. With a snap-in type sensor, move the sensor about until you hear the snap and then gently rotate the tab.