How to Replace the Throttle Position Sensor on the Throttle Body on 2002 Dodge Durango?

To remove the Throttle Position Sensor (TPS) you need to remove the air duct and resonator, remove the electrical connector, and remove the mounting bolts. For installing, pay attention to the alignment on the throttle shaft, tighten bolts to 7 Nm, check whether there is binding, and then re-connect the electrical connector and install the air parts.

OEM 2002 Dodge Durango Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Position Sensor found

View related parts
2002 Dodge Durango Throttle Position Sensor Part Number: 5017479AA
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor; Sensor Kit Throttle Position
- Replaces: 4882219
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.9 x 2.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017479AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Durango Submodels:
- Adventurer, Base, Limited, R/T, SLT, SLT Plus, ST, SXT, Sport | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2002 Dodge Durango Throttle Position Sensor Parts and Q&A

Q: How to Replace the Throttle Position Sensor on the Throttle Body on 2002 Dodge Durango?
A: To remove the Throttle Position Sensor (TPS) you need to remove the air duct and resonator, remove the electrical connector, and remove the mounting bolts. For installing, pay attention to the alignment on the throttle shaft, tighten bolts to 7 Nm, check whether there is binding, and then re-connect the electrical connector and install the air parts.