How to Remove and Install a Vapor Canister on 2002 Dodge Ram 3500?

Two EVAP canisters are installed, one on each side of the bracket which is placed below the back of the cab on the outside of the right frame rail. Remove each fuel tube/line from the individual canisters before you take out the canisters, marking the places they were so you can put them back easily. After that, remove the nuts from inside the mountings and unlink each canister from the mounting bracket. Place each canister on its bracket, insert the nuts and tighten them until you reach a torque of 9 Nm (80 in. lbs.). Afterward, attach the fuel tubes/lines back to every canister.

OEM 2002 Dodge Ram 3500 Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Vapor Canisters found

View related parts
2002 Dodge Ram 3500 Vapor Canister Part Number: 53030837
Product Specifications
- Other Name: Canister - Vapor; Canister, Vacuum; Canister, Vapor; Canister Vapor
- Item Weight: 5.30 Pounds
- Item Dimensions: 5.7 x 8.5 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030837
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Ram 3500 Vapor Canister Part Number: 53031584AC
Product Specifications
- Other Name: Canister - Vapor; Canister Fuel Vapor; Canister Vapor
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53031584AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base, Laramie, SLT, ST, Sport | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2002 Dodge Ram 3500 Vapor Canister Parts and Q&A

Q: How to Remove and Install a Vapor Canister on 2002 Dodge Ram 3500?
A: Two EVAP canisters are installed, one on each side of the bracket which is placed below the back of the cab on the outside of the right frame rail. Remove each fuel tube/line from the individual canisters before you take out the canisters, marking the places they were so you can put them back easily. After that, remove the nuts from inside the mountings and unlink each canister from the mounting bracket. Place each canister on its bracket, insert the nuts and tighten them until you reach a torque of 9 Nm (80 in. lbs.). Afterward, attach the fuel tubes/lines back to every canister.