How to Service a Blower Motor Resistor on 2002 Dodge Stratus?

First, pull off the lower right silencer panel to service the blower motor resistor. Take the wiring connectors off the resistor first and afterward unscrew the blower resistor mount. Remove the blower motor resistor from the housing of your HVAC. Install the blower resistor inside the HVAC housing and hold it in place by screwing down the two screws. Connect the resistor wiring harness and replace the right side panel for your silencer heat shield.

OEM 2002 Dodge Stratus Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blower Motor Resistors found

View related parts
2002 Dodge Stratus Resistor Part Number: MR398371
$18.41 MSRP: $23.34
You Save: $4.93 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR398371
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Dodge Stratus Submodels:
- R/T, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2002 Dodge Stratus Resistor Part Number: MR500971
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR500971
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Dodge Stratus Submodels:
- R/T, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

2002 Dodge Stratus Blower Motor Resistor Parts and Q&A

Q: How to Service a Blower Motor Resistor on 2002 Dodge Stratus?
A: First, pull off the lower right silencer panel to service the blower motor resistor. Take the wiring connectors off the resistor first and afterward unscrew the blower resistor mount. Remove the blower motor resistor from the housing of your HVAC. Install the blower resistor inside the HVAC housing and hold it in place by screwing down the two screws. Connect the resistor wiring harness and replace the right side panel for your silencer heat shield.