Can a Scored or Worn Brake Disc Be Machined on 2002 Jeep Liberty?

A disc brake disc that shows wear or a score can be machined by using a lathe with two cutter heads for simultaneous machining. It is important to first clean the area where you will mount the disc, as a machine that only has one machining side might create a tapered disc. An on-vehicle hub lathe is the best choice, as it allows the disc to be trued to the vehicle's touching hub/bearing. Discs that do not meet the required thickness level either pre- or post-machining must be substituted.

OEM 2002 Jeep Liberty Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Disc found

View related parts
2002 Jeep Liberty Rotor, Front Part Number: 52128247AA
$239.07 MSRP: $351.00
You Save: $111.93 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Front
- Item Weight: 17.90 Pounds
- Item Dimensions: 11.3 x 11.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52128247AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2002 Jeep Liberty Brake Disc Parts and Q&A

Q: Can a Scored or Worn Brake Disc Be Machined on 2002 Jeep Liberty?
A: A disc brake disc that shows wear or a score can be machined by using a lathe with two cutter heads for simultaneous machining. It is important to first clean the area where you will mount the disc, as a machine that only has one machining side might create a tapered disc. An on-vehicle hub lathe is the best choice, as it allows the disc to be trued to the vehicle's touching hub/bearing. Discs that do not meet the required thickness level either pre- or post-machining must be substituted.