OEM 2002 Jeep Liberty ABS Control Module

2002 Jeep Liberty ABS Control Module Parts and Q&A

• Q: How to Service and Repair an ABS Control Module in the Hydraulic Control Assembly on 2002 Jeep Liberty?

  A: Install a prop rod on the brake pedal to keep pressure in the braking system during service and repair of the Hydraulic Control Assembly for the antilock brakes. After that, take off the link to the battery's negative terminal and raise the harness's connector release to remove the plug. After that, take off the HCU's brake lines and then remove the HCU/CAB mounting nuts and bolt to remove the HCU/CAB. Secure the HCU/CAB to the mounting studs using the mounting nuts and bolt. Remember to tighten them to 11.5 Nm (102 inch lbs.). Link the brake hoses to the HCU and hand-tighten them so the torque is 19 Nm (170 inch lbs.). Please ensure that all wiring harness terminals are placed on the CAB, then push the release to seal them securely before continuing. The last step is to get rid of any air from the ABS system.