Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2002 Jeep Liberty Steering Knuckle

Front Steering Knuckle
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

  • 2002 Jeep Liberty Steering Knuckle - 52088652AE
    2002 Jeep Liberty Steering Knuckle - 52088652AE
    2002 Jeep Liberty Steering Knuckle Diagram - 52088652AE
    View related parts

    2002 Jeep Liberty Knuckle, Front Passenger Side Part Number: 52088652AE

    Product Specifications
    • Other Name: Knuckle - Front; Steering Knuckle, Front Right
    • Position: Front Passenger Side
    • Replaces: 52088652AC, 52088652AD
    • Item Weight: 13.70 Pounds
    • Item Dimensions: 14.1 x 11.2 x 5.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52088652AE
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2002 Jeep Liberty Submodels:
    • 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
  • 2002 Jeep Liberty Steering Knuckle - 52088653AE
    2002 Jeep Liberty Steering Knuckle Diagram - 52088653AE
    View related parts

    2002 Jeep Liberty Knuckle, Front Driver Side Part Number: 52088653AE

    Product Specifications
    • Other Name: Knuckle - Front; Steering Knuckle, Front Left
    • Position: Front Driver Side
    • Replaces: 52088653AD, 52088653AC
    • Item Weight: 13.40 Pounds
    • Item Dimensions: 14.3 x 11.1 x 5.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52088653AE
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2002 Jeep Liberty Submodels:
    • 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2002 Jeep Liberty Steering Knuckle Parts and Q&A

  • Q: How to Service and Repair a Steering Knuckle on 2002 Jeep Liberty?
    A: Before servicing the steering knuckle, lift the vehicle, remove the wheel and tire assembly, the caliper adapter and always hold the brake caliper while removing its parts to keep the brake hose safe. After that, get rid of the disc brake rotor, wheel speed sensor and the axle shaft nut (for four-wheel drive), then remove the hub/bearing. After that, remove the lower ball joint nut which can be done with tool C-4150A and remove the outer tie rod end. After lifting the wheel assembly, separate the upper ball joint from the knuckle with C-4150A and remove the nut off the top ball joint. Put the knuckle onto the vehicle first, then connect the upper ball joint nut and tighten it to 81 Nm (60 ft. lbs.), connect the lower ball joint nut afterward and do the same. After that, insert the outer tie rod end, bearing/hub and axle shaft nut and tighten the nut to 135 Nm (96 ft. lbs.) if your vehicle is four-wheel drive. Afterward, attach the wheel speed sensor, disc brake rotor, caliper adapter and tire and wheel assembly and complete the set toe procedure.

Related 2002 Jeep Liberty Parts

Alternate Year Models

+
2003 Jeep Liberty Steering Knuckle