How to Service a Pitman Arm on 2002 Jeep Wrangler?

In order to service the pitman arm, the cotter pin and nut in the drag link are to be removed, and the drag link ball stud is to be removed. Label, remove the nut and washer off the steering gear shaft. Install the pitman arm, screw in the nut and reconnect the drag link using a new cotter pin.

OEM 2002 Jeep Wrangler Pitman Arm

Steering Pitman Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Pitman Arm found

View related parts
2002 Jeep Wrangler Pitman Arm Part Number: 52038337
$55.21 MSRP: $121.00
You Save: $65.79 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Pitman; Steering Pitman Arm; Idler Arm; Arm Pitman
- Item Weight: 2.30 Pounds
- Item Dimensions: 1.7 x 10.6 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52038337
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2002 Jeep Wrangler Pitman Arm Parts and Q&A

Q: How to Service a Pitman Arm on 2002 Jeep Wrangler?
A: In order to service the pitman arm, the cotter pin and nut in the drag link are to be removed, and the drag link ball stud is to be removed. Label, remove the nut and washer off the steering gear shaft. Install the pitman arm, screw in the nut and reconnect the drag link using a new cotter pin.