How to Service and Repair a Tie Rod End on 2002 Jeep Wrangler?

Before you service or repair the tie rod end, take out the cotter pins and nuts at the steering knuckle and drag link. Use C-4150R to get rid of the ball studs. Sometimes, you'll have to stop pulling at the end, loosen the tie rod end's bolts and disconnect them from the tube. If the tie rod ends need to be installed, slip them into the tube, put the clamp in place and tighten to 27 Nm (20 ft. lbs.). Following this, place the tie rod on top of the drag link and steering knuckle. After that, tighten the ball stud nut on the steering knuckle and the ball stud nut to the drag link to 47 Nm (35 ft. lbs.) and install new cotter pins.

OEM 2002 Jeep Wrangler Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Tie Rod Ends found

View related parts
2002 Jeep Wrangler Tie Rod End, Outer Driver Side Part Number: 52005741
$53.73 MSRP: $118.00
You Save: $64.27 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod; Steering Tie Rod End, Left Outer; Drag Link Repair Kit; Outer Tie Rod End; Drag Link; Inner Tie Rod; Outer Tie Rod; Drag Link End; Tie Rod Ends for steering system.
- Position: Outer Driver Side
- Item Weight: 1.80 Pounds
- Item Dimensions: 6.7 x 3.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52005741
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Base, Islander, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2002 Jeep Wrangler Tie Rod End, Inner Passenger Side Part Number: 52005740
$77.10 MSRP: $118.00
You Save: $40.90 (35%)
ADD TO CART
Product Specifications
- Other Name: Tie Rod; Steering Tie Rod End, Right Inner; Drag Link Repair Kit; Outer Tie Rod End; Center Link; Drag Link; Inner Tie Rod; Outer Tie Rod; End, Tie Rod (Passenger Side Th'D); Socket Tie Rod Inner; Steering Tie Rod End
- Position: Inner Passenger Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.5 x 3.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52005740
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Base, Islander, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2002 Jeep Wrangler Tie Rod End, Front Part Number: 52005739
$68.63 MSRP: $103.00
You Save: $34.37 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tie Rod; Steering Tie Rod End, Left Inner; Front Tie Rod; Drag Link Kit; Outer Tie Rod; Center Link; Inner Tie Rod, Outer Tie Rod, Drag Link End, Tie Rod Ends, Steering Tie Rod End.
- Position: Front
- Item Weight: 1.90 Pounds
- Item Dimensions: 6.3 x 3.6 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52005739
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Base, Islander, Renegade, Rio Grande, Rubicon, S, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2002 Jeep Wrangler Tie Rod End Parts and Q&A

Q: How to Service and Repair a Tie Rod End on 2002 Jeep Wrangler?
A: Before you service or repair the tie rod end, take out the cotter pins and nuts at the steering knuckle and drag link. Use C-4150R to get rid of the ball studs. Sometimes, you'll have to stop pulling at the end, loosen the tie rod end's bolts and disconnect them from the tube. If the tie rod ends need to be installed, slip them into the tube, put the clamp in place and tighten to 27 Nm (20 ft. lbs.). Following this, place the tie rod on top of the drag link and steering knuckle. After that, tighten the ball stud nut on the steering knuckle and the ball stud nut to the drag link to 47 Nm (35 ft. lbs.) and install new cotter pins.