How to Service a Power Steering Pump on 2002 Jeep Wrangler?

To start, release the serpentine drive belt and then disconnect the hoses of pressure and return from the pump and drain it. After that, open the pulley access holes and remove the three bolts attaching the pump, as well as the three bracket bolts. Tip the pump down out of the engine and then remove the pulley from it. First, install the pulley on the pump and then bolt the pump in place on the engine bracket, tightening all the bolds to 47 Nm (35 ft. lbs.). Screw in the three pump mounting bolts to 27 Nm (20 ft. lbs.) and then link the pressure line to the pump and screw it in at 28 Nm (21 ft. lbs.). Afterward, connect the return hoses to the pump, install the drive belt and pour power steering fluid into the pump.

OEM 2002 Jeep Wrangler Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Pumps found

View related parts
2002 Jeep Wrangler Power Steering Pump Part Number: 52088018
Product Specifications
- Other Name: Pump - Power Steering; Pump Power Steering
- Item Weight: 5.10 Pounds
- Item Dimensions: 7.4 x 5.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52088018
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Wrangler Submodels:
- SE | 4 Cyl 2.5 L GAS
View related parts
2002 Jeep Wrangler Power Steering Pump Part Number: RL087871AE
Product Specifications
- Other Name: Pump - Power Steering
- Replaces: 52087871AE, 52087871AD
- Item Weight: 6.60 Pounds
- Item Dimensions: 14.1 x 12.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: RL087871AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4.0L V6, 6 Cyl 4.0 L GAS

2002 Jeep Wrangler Power Steering Pump Parts and Q&A

Q: How to Service a Power Steering Pump on 2002 Jeep Wrangler?
A: To start, release the serpentine drive belt and then disconnect the hoses of pressure and return from the pump and drain it. After that, open the pulley access holes and remove the three bolts attaching the pump, as well as the three bracket bolts. Tip the pump down out of the engine and then remove the pulley from it. First, install the pulley on the pump and then bolt the pump in place on the engine bracket, tightening all the bolds to 47 Nm (35 ft. lbs.). Screw in the three pump mounting bolts to 27 Nm (20 ft. lbs.) and then link the pressure line to the pump and screw it in at 28 Nm (21 ft. lbs.). Afterward, connect the return hoses to the pump, install the drive belt and pour power steering fluid into the pump.