How to Service and Repair a Wheel Bearing on 2002 Jeep Wrangler?

You should start by lifting and supporting the vehicle, then remove the wheel and tie at the next step. After that, remove the brake caliper, rotor and ABS wheel speed sensor. Following this, get rid of the cotter pin, nut retainer and axle hub nut. Remove the back bolt from the steering knuckle hub bearing and take out the hub bearing, along with the shaft, from the steering knuckle. You should first put the hub bearing and brake dust shield onto the knuckle, then install the hub bearing to knuckle bolts and tighten them to 102 Nm (75 ft. lbs.). Afterward, put the hub washer and nut in place and tighten the nut to 237 Nm (175 ft. lbs.). When it's fitted, put the nut retainer and a new cotter pin in place. Finally, place the brake rotor, caliper and ABS wheel speed sensor on top, add the wheel and tire and drop the vehicle after removing the helpers.

OEM 2002 Jeep Wrangler Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Bearing found

View related parts
2002 Jeep Wrangler Axle Bearings, Rear Part Number: 68499023AA
$154.62 MSRP: $242.00
You Save: $87.38 (37%)
ADD TO CART
Product Specifications
- Other Name: Bearing - Axle Shaft; Drive Axle Shaft, Rear; Differential Pinion, Differential, Wheel, Axle Bearing.; Side Bearings; Bearing; Bearing Axle Shaft
- Position: Rear
- Replaces: 83503064
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68499023AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Wrangler Submodels:
- 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Unlimited X, Willys, Willys Sport, X, X-S | 2.4L L4, 2.5L L4, 3.6L V6, 3.8L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 6.4 L GAS

2002 Jeep Wrangler Wheel Bearing Parts and Q&A

Q: How to Service and Repair a Wheel Bearing on 2002 Jeep Wrangler?
A: You should start by lifting and supporting the vehicle, then remove the wheel and tie at the next step. After that, remove the brake caliper, rotor and ABS wheel speed sensor. Following this, get rid of the cotter pin, nut retainer and axle hub nut. Remove the back bolt from the steering knuckle hub bearing and take out the hub bearing, along with the shaft, from the steering knuckle. You should first put the hub bearing and brake dust shield onto the knuckle, then install the hub bearing to knuckle bolts and tighten them to 102 Nm (75 ft. lbs.). Afterward, put the hub washer and nut in place and tighten the nut to 237 Nm (175 ft. lbs.). When it's fitted, put the nut retainer and a new cotter pin in place. Finally, place the brake rotor, caliper and ABS wheel speed sensor on top, add the wheel and tire and drop the vehicle after removing the helpers.