How to Service and Repair the Wheel Bearing on a Rear Axle 194RBI on 2001 Jeep Wrangler?

The first step to service and repair is to remove the rear axle shaft, then remove the axle shaft seal with the small pry bar from the end of the shaft tube. After that, pull out the axle shaft bearing by attaching Bearing Removal Tool Set 6310 and Adapter Foot 6310-5 to the axle tube. Ensure the bore within the axle shaft tube doesn't have any roughness or burrs and repair them when necessary. Before installing, make sure the axle shaft tube bore is clean. Use Installer 6436 and Handle C-4171 to put the new axle shaft bearing in place, making sure the part number you see is facing the installer. After that, stick the new axle shaft seal inside using Installer 6437 and Handle C-4171, then slide the axle shaft back into its place.

OEM 2001 Jeep Wrangler Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Bearing found

View related parts
2001 Jeep Wrangler Axle Bearings, Rear Part Number: 68499023AA
$154.62 MSRP: $242.00
You Save: $87.38 (37%)
ADD TO CART
Product Specifications
- Other Name: Bearing - Axle Shaft; Drive Axle Shaft, Rear; Differential Pinion, Differential, Wheel, Axle Bearing.; Side Bearings; Bearing; Bearing Axle Shaft
- Position: Rear
- Replaces: 83503064
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68499023AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2001 Jeep Wrangler Submodels:
- 65th Anniversary Edition, 70th Anniversary, 75th Anniversary, 80th Anniversary, Freedom, Islander, Rubicon, Rubicon X, SE, Sahara, Sport, Sport S, Unlimited, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited 80th Anniversary, Unlimited Freedom, Unlimited High Altitude, Unlimited High Altitude 4xe, Unlimited High Tide, Unlimited Islander, Unlimited Moab, Unlimited Rubicon, Unlimited Rubicon 392, Unlimited Rubicon 4xe, Unlimited Rubicon X, Unlimited Rubicon X 4xe, Unlimited Sahara, Unlimited Sahara 4xe, Unlimited Sahara Altitude, Unlimited Sport, Unlimited Sport Altitude, Unlimited Sport S, Unlimited Sport S 4xe, Unlimited Willys, Unlimited Willys 4xe, Unlimited Willys Sport, Unlimited X, Willys, Willys Sport, X, X-S | 2.4L L4, 2.5L L4, 3.6L V6, 3.8L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 4.0L L6, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 6.4 L GAS

2001 Jeep Wrangler Wheel Bearing Parts and Q&A

Q: How to Service and Repair the Wheel Bearing on a Rear Axle 194RBI on 2001 Jeep Wrangler?
A: The first step to service and repair is to remove the rear axle shaft, then remove the axle shaft seal with the small pry bar from the end of the shaft tube. After that, pull out the axle shaft bearing by attaching Bearing Removal Tool Set 6310 and Adapter Foot 6310-5 to the axle tube. Ensure the bore within the axle shaft tube doesn't have any roughness or burrs and repair them when necessary. Before installing, make sure the axle shaft tube bore is clean. Use Installer 6436 and Handle C-4171 to put the new axle shaft bearing in place, making sure the part number you see is facing the installer. After that, stick the new axle shaft seal inside using Installer 6437 and Handle C-4171, then slide the axle shaft back into its place.