How to Replace a Washer Pump on 2003 Chrysler Sebring?

Start by cutting the negative cable that links to your battery's remote terminal before trying to change your windshield washer reservoir pump. Take off some of the bumper fascia where needed to expose the reservoir pump. Put a drain bucket beneath the reservoir to prevent any washer solvent from spilling out. Hold the pump in hand, twist it around and then pull it away from and outside of the grommet without touching or hurting the reservoir. Pull the rubber grommet from the reservoir and throw it away. A replacement grommet must be fitted during installation. Ensure the grommet is not torn by grabbing the pump in hand, twisting it and pushing it straightly into the reservoir. If any of the fascia is gone, put it back on as soon as possible. Fill the washing solvent container and then plug in the negative remote cable to the battery.

OEM 2003 Chrysler Sebring Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Washer Pumps found

View related parts
2003 Chrysler Sebring Washer Pump Part Number: 5103452AA
$87.90 MSRP: $183.00
You Save: $95.10 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Washer, Windshield; Back Glass Washer Pump; Windshield Washer Pump; Washer Pump Repair Kit; Front Washer Pump; Rear Washer Pump; Pump Washer, Windshield
- Replaces: 55077241AA, 5015938AA, 5012602AA, 55077241AB
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.0 x 2.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103452AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Chrysler Sebring Washer Pump Part Number: MR339099
$40.63 MSRP: $51.51
You Save: $10.88 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Washer, Windshield; Windshield Washer Pump; Washer Pump Repair Kit; Pump Washer, Windshield
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.5 x 2.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR339099
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Chrysler Sebring Washer Pump, Front Part Number: 5019258AA
Product Specifications
- Other Name: Motor - Washer, Headlamp; Headlight Washer Pump Grommet, Front; Windshield Washer Pump; Pump Washer, Headlamp
- Position: Front
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5019258AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2003 Chrysler Sebring Washer Pump Parts and Q&A

Q: How to Replace a Washer Pump on 2003 Chrysler Sebring?
A: Start by cutting the negative cable that links to your battery's remote terminal before trying to change your windshield washer reservoir pump. Take off some of the bumper fascia where needed to expose the reservoir pump. Put a drain bucket beneath the reservoir to prevent any washer solvent from spilling out. Hold the pump in hand, twist it around and then pull it away from and outside of the grommet without touching or hurting the reservoir. Pull the rubber grommet from the reservoir and throw it away. A replacement grommet must be fitted during installation. Ensure the grommet is not torn by grabbing the pump in hand, twisting it and pushing it straightly into the reservoir. If any of the fascia is gone, put it back on as soon as possible. Fill the washing solvent container and then plug in the negative remote cable to the battery.