How to Remove and Install the Idle Control Valve on the Throttle Body on 2003 Dodge Durango?

To replace the IAC motor on the throttle body, remove air duct and resonator box, disconnect the electrical connector and unscrew the two mounting bolts. Install the new motor and secure this with bolts at 7 Nm torque, reconnect the electrical connector and reinstall the air duct and box.

OEM 2003 Dodge Durango Idle Control Valve

IACV

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Idle Control Valves found

View related parts
2003 Dodge Durango Idle Speed Control Part Number: 53030657AD
$105.09 MSRP: $155.00
You Save: $49.91 (33%)
Product Specifications
- Other Name: Motor - Air Idle Speed; Fuel Injection Idle Air Control Valve; Idle Air Control Valve; Idle Control Motor; Idle Speed Control Motor
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030657AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Idle Speed Control Part Number: 53030840AC
Product Specifications
- Other Name: Motor - Air Idle Speed; Fuel Injection Idle Control Valve; Idle Control Motor; Idle Speed Control Motor
- Replaces: 53030840AB, 53030840
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030840AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Base, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS

2003 Dodge Durango Idle Control Valve Parts and Q&A

Q: How to Remove and Install the Idle Control Valve on the Throttle Body on 2003 Dodge Durango?
A: To replace the IAC motor on the throttle body, remove air duct and resonator box, disconnect the electrical connector and unscrew the two mounting bolts. Install the new motor and secure this with bolts at 7 Nm torque, reconnect the electrical connector and reinstall the air duct and box.