How to Remove and Install a Front Door Window Regulator on 2003 Dodge Durango?

Before taking out the front door window regulator, first remove the door trim panel and waterdam. Slide the glass so you can reach the fasteners and loosen them and then pull the glass out of the regulator channel. Practice inserting the glass into the door jamb and set it on a wooden block on the reinforcement. Take off the window regulator wire harness and then get rid of the screws on the door. After that, get the window regulator out of the door. To install, place the window regulator in the door and then only loosely screw it to the door inner panel. Attach the glass shown to the regulator lift with the provided fasteners. Open the window to its highest point, bolt the bottom of the front glass run channel to the door and tighten the fasteners of the window regulator on the door inner panel. Installing the waterdam should follow attachment of the regulator wire harness if fitted and lastly put in place the door trim panel.

OEM 2003 Dodge Durango Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Window Regulators found

View related parts
2003 Dodge Durango Window Regulator, Rear Passenger Side Part Number: 55256494AM
$243.93 MSRP: $565.00
You Save: $321.07 (57%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Right; Regulator; Regulator Rear Door Window
- Position: Rear Passenger Side
- Replaces: 55256494AL, 55256494AK
- Item Weight: 4.00 Pounds
- Item Dimensions: 27.6 x 18.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55256494AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- R/T, SLT, SLT Plus, SXT, Sport | 4.7L V8, 5.9L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Window Regulator, Front Driver Side Part Number: 55362921AB
$162.56 MSRP: $285.00
You Save: $122.44 (43%)
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left
- Position: Front Driver Side
- Replaces: 55362921AA
- Item Weight: 3.90 Pounds
- Item Dimensions: 26.1 x 15.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55362921AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Window Regulator, Front Driver Side Part Number: 55256419AI
$129.16 MSRP: $190.00
You Save: $60.84 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left; Regulator Front Door Window
- Position: Front Driver Side
- Replaced by: 5066431AC
- Item Weight: 4.20 Pounds
- Item Dimensions: 26.3 x 14.4 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55256419AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Window Regulator, Rear Driver Side Part Number: 55256495AM
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Left; Regulator; Regulator Rear Door Window
- Position: Rear Driver Side
- Replaces: 55256495AJ, 55256495AL, 55256495AK
- Item Weight: 3.80 Pounds
- Item Dimensions: 5.4 x 9.9 x 26.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55256495AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- R/T, SLT, SLT Plus, SXT, Sport | 4.7L V8, 5.9L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Window Regulator, Front Driver Side Part Number: 55256419AN
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left, Front Right; Regulator; Regulator Front Door Window
- Position: Front Driver Side
- Replaces: 55256419AK, 55256419AL
- Item Weight: 4.20 Pounds
- Item Dimensions: 26.3 x 14.1 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55256419AN
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 4.7L V8, 5.9L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Window Regulator, Front Passenger Side Part Number: 55256418AN
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left, Front Right; Regulator; Regulator Front Door Window
- Position: Front Passenger Side
- Replaces: 55256418AK, 55256418AM, 55256418AL
- Item Weight: 4.30 Pounds
- Item Dimensions: 26.3 x 14.7 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55256418AN
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 4.7L V8, 5.9L V8, 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Durango Window Regulator Parts and Q&A

Q: How to Remove and Install a Front Door Window Regulator on 2003 Dodge Durango?
A: Before taking out the front door window regulator, first remove the door trim panel and waterdam. Slide the glass so you can reach the fasteners and loosen them and then pull the glass out of the regulator channel. Practice inserting the glass into the door jamb and set it on a wooden block on the reinforcement. Take off the window regulator wire harness and then get rid of the screws on the door. After that, get the window regulator out of the door. To install, place the window regulator in the door and then only loosely screw it to the door inner panel. Attach the glass shown to the regulator lift with the provided fasteners. Open the window to its highest point, bolt the bottom of the front glass run channel to the door and tighten the fasteners of the window regulator on the door inner panel. Installing the waterdam should follow attachment of the regulator wire harness if fitted and lastly put in place the door trim panel.