How to Service and Repair an Exhaust Pipe on 2003 Dodge Neon?

Before repairing or servicing the intermediate pipe of the exhaust system, place the vehicle on a hoist, apply penetrating oil to the fastener, avoid petroleum lubrication on parts made of rubber or similar materials and use a soapy water mix excluding petroleum. Start with taking off the muffler and then loosen the tie-down on the converter and joining pipe. Then, unbolt the intermediate pipe support isolator, divide at the slip joint and bring out the middle pipe section. Clean all the pipes and muffler ends and get rid of any broken, rusty or used up attaching parts. Tighten clamps only once every part is straight and any necessary clearances are met. Attach the catalytic converter to the intermediate pipe and add the isolator supports to the underside, followed by puts the muffler on the intermediate pipe and the isolator supports under the body. Center all system parts from the front end so they do not rub under the car and set all band clamp tightness to 47 Nm (35 ft. lbs.). Don't tighten band clamps too much, since doing so can stretch the clamps and make them less effective, meaning you will need to replace them. Replace the nut, pull back the ends of the clamp so the spot weld breaks and put on the new clamp with good orientation. The final step is to link the exhaust system ground strap.

OEM 2003 Dodge Neon Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Exhaust Pipes found

View related parts
2003 Dodge Neon Tail Pipe Part Number: 5290963AE
$105.54 MSRP: $606.00
You Save: $500.46 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Tail Pipe; Exhaust Pipe; Tailpipe; Pipe Exhaust
- Replaces: 5290963AC, 5290963AD
- Item Weight: 13.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5290963AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- SRT-4 | 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Muffler Part Number: 4546968AD
$181.93 MSRP: $261.00
You Save: $79.07 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Muffler Exhaust
- Replaces: 4546968AC, 4546968AB
- Item Weight: 18.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4546968AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SXT | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
2003 Dodge Neon Extension Pipe Part Number: 5278831AF
Product Specifications
- Other Name: Pipe - Exhaust Extension; Exhaust Intermediate Pipe; Exhaust Pipe; Intermed Pipe; Pipe Exhaust Extension
- Replaces: 5278831AE, 5278831AD
- Item Weight: 17.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278831AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- SRT-4 | 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Front Pipe Part Number: 5278622AD
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Converter Catalytic
- Item Weight: 13.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278622AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Neon Submodels:
- R/T | 4 Cyl 2.0 L GAS
View related parts
2003 Dodge Neon Front Pipe Part Number: 5278126AJ
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter; Exhaust Pipe; Converter & Pipe; Converter Catalytic
- Item Weight: 13.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278126AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Neon Submodels:
- SE, SXT | 4 Cyl 2.0 L GAS
View related parts
2003 Dodge Neon Extension Pipe Part Number: 4546975AH
Product Specifications
- Other Name: Pipe - Exhaust Extension; Exhaust Intermediate Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Intermed Pipe; Pipe Exhaust Extension
- Replaces: 4546975AG
- Item Weight: 14.00 Pounds
- Item Dimensions: 90.9 x 22.0 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4546975AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, SE, SXT | 4 Cyl 2.0 L GAS
View related parts
2003 Dodge Neon Extension Pipe Part Number: 5278623AF
Product Specifications
- Other Name: Pipe - Exhaust Extension; Exhaust Intermediate Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Intermed Pipe; Pipe Exhaust Extension
- Replaces: 5278623AD, 5278623AE, 5278623AC
- Item Weight: 16.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278623AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- R/T | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
2003 Dodge Neon Muffler Part Number: 5278624AH
Product Specifications
- Other Name: Muffler - Exhaust; Exhaust Muffler; Muffler Exhaust
- Replaces: 5278624AG
- Item Weight: 29.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278624AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- R/T | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
2003 Dodge Neon Front Pipe Part Number: 5278941AD
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter; Exhaust Pipe; Converter & Pipe
- Replaces: 5278941AB, 5278941AC
- Item Weight: 13.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278941AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- SRT-4 | 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Catalytic Converter Part Number: 4546942AJ
Product Specifications
- Other Name: Converter - Catalytic; Converter Catalytic
- Item Weight: 14.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4546942AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, High Line, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Catalytic Converter Part Number: 5278126AL
Product Specifications
- Other Name: Converter - Catalytic; Exhaust Pipe; Front Pipe; Converter & Pipe; Converter Catalytic
- Item Weight: 13.50 Pounds
- Item Dimensions: 34.7 x 13.1 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5278126AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- R/T, SE, SXT | 4 Cyl 2.0 L GAS

2003 Dodge Neon Exhaust Pipe Parts and Q&A

Q: How to Service and Repair an Exhaust Pipe on 2003 Dodge Neon?
A: Before repairing or servicing the intermediate pipe of the exhaust system, place the vehicle on a hoist, apply penetrating oil to the fastener, avoid petroleum lubrication on parts made of rubber or similar materials and use a soapy water mix excluding petroleum. Start with taking off the muffler and then loosen the tie-down on the converter and joining pipe. Then, unbolt the intermediate pipe support isolator, divide at the slip joint and bring out the middle pipe section. Clean all the pipes and muffler ends and get rid of any broken, rusty or used up attaching parts. Tighten clamps only once every part is straight and any necessary clearances are met. Attach the catalytic converter to the intermediate pipe and add the isolator supports to the underside, followed by puts the muffler on the intermediate pipe and the isolator supports under the body. Center all system parts from the front end so they do not rub under the car and set all band clamp tightness to 47 Nm (35 ft. lbs.). Don't tighten band clamps too much, since doing so can stretch the clamps and make them less effective, meaning you will need to replace them. Replace the nut, pull back the ends of the clamp so the spot weld breaks and put on the new clamp with good orientation. The final step is to link the exhaust system ground strap.