How to service a Canister Purge Valve on 2003 Dodge Neon?

To access the Canister Purge Valve, you need to raise and hold up the car first. Separate the wiring from the valve and the vacuum tubes, since the valve is mounted close to the steering gear and should be installed right as the "TOP" mark on the valve indicates. When the valve is off the bracket, fit the new or repaired valve onto it, align the vacuum tube and electrical connector and then bring down the vehicle.

OEM 2003 Dodge Neon Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2003 Dodge Neon Purge Valve Part Number: 4669569
Product Specifications
- Other Name: Solenoid - Proportional Purge; Vapor Canister Purge Solenoid; Purge Solenoid; EGR Solenoid; Proportional and Linear Purge Solenoids.
- Item Weight: 1.00 Pounds
- Item Dimensions: 2.6 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4669569
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2003 Dodge Neon Canister Purge Valve Parts and Q&A

Q: How to service a Canister Purge Valve on 2003 Dodge Neon?
A: To access the Canister Purge Valve, you need to raise and hold up the car first. Separate the wiring from the valve and the vacuum tubes, since the valve is mounted close to the steering gear and should be installed right as the "TOP" mark on the valve indicates. When the valve is off the bracket, fit the new or repaired valve onto it, align the vacuum tube and electrical connector and then bring down the vehicle.