How to Service an Oil Pressure Switch on 2003 Dodge Ram 1500?

To maintain the oil pressure sensor, disconnection of the negative battery cable and raising the vehicle. Take out the front splash shield, strip off the sender wire and take out the sender. Install the new sender, reconnect the wire, reattach the splash shield, lower the vehicle and reattach the battery cable.

OEM 2003 Dodge Ram 1500 Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2003 Dodge Ram 1500 Oil Pressure Sending Unit Part Number: 4868672AA
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Oil Pressure Switch; Switch Oil Pressure
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 1.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4868672AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 1500 Submodels:
- Laramie, SLT, ST, Sport, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2003 Dodge Ram 1500 Oil Pressure Switch Parts and Q&A

Q: How to Service an Oil Pressure Switch on 2003 Dodge Ram 1500?
A: To maintain the oil pressure sensor, disconnection of the negative battery cable and raising the vehicle. Take out the front splash shield, strip off the sender wire and take out the sender. Install the new sender, reconnect the wire, reattach the splash shield, lower the vehicle and reattach the battery cable.