Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2003 Jeep Grand Cherokee ABS Control Module

Anti Lock Brake Control Module
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Control Modules found

  • 2003 Jeep Grand Cherokee ABS Control Module - 5066653AB
    2003 Jeep Grand Cherokee ABS Control Module - 5066653AB
    2003 Jeep Grand Cherokee ABS Control Module Diagram - 5066653AB
    View related parts

    2003 Jeep Grand Cherokee Control Module Part Number: 5066653AB

    Product Specifications
    • Other Name: Module - ABS; ABS Control Module; Module; Module Anti-Lock Brakes
    • Item Weight: 1.90 Pounds
    • Item Dimensions: 6.1 x 4.4 x 2.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5066653AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2003 Jeep Grand Cherokee Submodels:
    • Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
  • 2003 Jeep Grand Cherokee ABS Control Module - 5066657AB
    2003 Jeep Grand Cherokee ABS Control Module Diagram - 5066657AB
    View related parts

    2003 Jeep Grand Cherokee Modulator Valve Part Number: 5066657AB

    Product Specifications
    • Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Control Unit Anti-Lock Brake
    • Item Weight: 5.30 Pounds
    • Item Dimensions: 6.8 x 7.0 x 6.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5066657AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2003 Jeep Grand Cherokee Submodels:
    • Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2003 Jeep Grand Cherokee ABS Control Module Parts and Q&A

  • Q: How to Service and Repair an ABS Control Module in the Hydraulic Control Assembly for Antilock Brakes on 2003 Jeep Grand Cherokee?
    A: You should start the repair by taking off the negative battery wire and adjusting the air cleaner housing to give access. Afterwards, squeeze down on the CAB connector release to pull them off, then separate the brake lines from the HCU. Get the side mounting bolt and both rear mounting bolts out of HCU/CAB and then take it off the vehicle. Should a new CAB be installed, it should be reprogrammed using an ORB 111. Place the HCU/CAB into its slot in the mounting bracket and hold it in place by tightening the mounting bolts to a torque of 12 Nm or 9 ft. lbs. Secure the brake lines to the HCU and tighten them to 16 Nm (12 ft. lbs.), after which connect the CAB harness and push down on the connector until it releases. Reconnect the housing for the air cleaner, secure the negative battery cable and go next to bleed both brake systems.

Related 2003 Jeep Grand Cherokee Parts

Alternate Year Models

+
2002 Jeep Grand Cherokee ABS Control Module 2004 Jeep Grand Cherokee ABS Control Module