How to Change a Rear Wiper Blade on 2003 Jeep Liberty?

Question

Accepted Answer

Release the rear wiper arm support from the park ramp on the right side of the tailgate under the rear glass to replace the rear wiper blade. Pull up on the rear wiper arm to raise both the wiper blade and its element away from the rear flip-up window and tailgate. Carefully raise the latch release tab on the wiper arm's pivot block and lift the blade to remove it from the arm above it. Lift the pivot block latch release tab until it is directly opposite the back part of the wiper blade main support. Slide back on the rear wiper blade far enough that the hook formation at the end of the arm unclips from the pivot block in the blade, then remove the hook formation from the window part inside the pivot block. Don't let the wiper arm bounce or move off the windshield without the blade first. Lower the wiper arm gently and then rest the arm support onto the park ramp. Raise the rear wiper arm support from the tailgate park ramp and place the rear wiper blade so that its hook ends up on top of the arm tip and the notched end of the wiper element flexor is positioned closest to the motor output shaft. Until the latch release tab is upright, raise the pivot block, insert the hook formed on the end of the wiper arm through the hole in the wiper blade pivot block/latch. Raise the pivot block/latch all the way up until the hook meets the tip of the wiper arm. Next, pull the pivot block latch release tab down until you hear it snap into place. Bring the wiper arm down carefully and put the arm support into the tailgate park ramp.

OEM 2003 Jeep Liberty Wiper Blade

3 Wiper Blades found

2003 Jeep Liberty Wiper Blade Part Number: 5066974AA

2003 Jeep Liberty Wiper Blade Part Number: 5066973AC

2003 Jeep Liberty Wiper Blade Part Number: 5066964AD

2003 Jeep Liberty Wiper Blade Parts and Q&A

Related 2003 Jeep Liberty Parts

Alternate Year Models