How to Service the A/C Switch on 2003 Jeep Wrangler?

To maintain the control assembly, turn off the air bag system by disconnecting the battery negative cable. Unscrew the glove box and center bezel, and remove the connector of the heater-A/C vacuum harness. Disassemble the heater-A/C control, re-fit the wire harness, and assemble parts, screwing them with a 2.2 Nm.

OEM 2003 Jeep Wrangler A/C Switch

Air Conditioning Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 A/C Switches found

View related parts
2003 Jeep Wrangler Dash Control Unit Part Number: 55037612AA
Product Specifications
- Other Name: Control - A/C And Heater; Climate Control Module; Control A/C And Heater
- Item Weight: 1.50 Pounds
- Item Dimensions: 4.0 x 8.1 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55037612AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Wrangler Submodels:
- Rubicon, SE, Sahara, Sport, Unlimited, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Jeep Wrangler Dash Control Unit Part Number: 55037611AA
Product Specifications
- Other Name: Control - A/C And Heater; Climate Control Module; Control A/C And Heater
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.3 x 8.4 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55037611AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Wrangler Submodels:
- Rubicon, SE, Sahara, Sport, Unlimited, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS

2003 Jeep Wrangler A/C Switch Parts and Q&A

Q: How to Service the A/C Switch on 2003 Jeep Wrangler?
A: To maintain the control assembly, turn off the air bag system by disconnecting the battery negative cable. Unscrew the glove box and center bezel, and remove the connector of the heater-A/C vacuum harness. Disassemble the heater-A/C control, re-fit the wire harness, and assemble parts, screwing them with a 2.2 Nm.