How to Replace a Blend Door Actuator on 2003 Jeep Wrangler?

To replace the blend door actuator, shut off the air bag system by disconnecting the battery negative cable and waiting two minutes. Disconnect the wire connector of the motor and remove the motor from the machine, then install the new motor, fix it with screws tightened to 1 Nm. Reconnect the wire harness and battery cable.

OEM 2003 Jeep Wrangler Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Blend Door Actuators found

View related parts
2003 Jeep Wrangler Actuator Part Number: 5013741AA
Product Specifications
- Other Name: Actuator - Blend Door; HVAC Defrost Mode Door Actuator; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Actuator Blend Door Electric; Actuator Blend Door
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5013741AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Jeep Wrangler Submodels:
- Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Jeep Wrangler Actuator Part Number: 5073181AA
Product Specifications
- Other Name: Actuator - A/C And Heater; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Actuator A/C And Heater Panel Door
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.1 x 3.9 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5073181AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Jeep Wrangler Actuator Part Number: 5073173AA
Product Specifications
- Other Name: Actuator - A/C And Heater; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; Actuator A/C And Heater Recirculation Door; Actuator A/C And Heater Recirculating
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.3 x 4.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5073173AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Jeep Wrangler Floor Duct Part Number: 5066518AA
Product Specifications
- Other Name: Actuator - A/C And Heater; HVAC Air Inlet Door Actuator; HVAC Heater Blend Door Actuator; Actuator; A/C and Heater Floor and Defrost Door.
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.2 x 4.2 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5066518AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Wrangler Submodels:
- 65th Anniversary Edition, Rubicon, SE, Sahara, Sport, Unlimited, Unlimited Rubicon, X | 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 4.0 L GAS

2003 Jeep Wrangler Blend Door Actuator Parts and Q&A

Q: How to Replace a Blend Door Actuator on 2003 Jeep Wrangler?
A: To replace the blend door actuator, shut off the air bag system by disconnecting the battery negative cable and waiting two minutes. Disconnect the wire connector of the motor and remove the motor from the machine, then install the new motor, fix it with screws tightened to 1 Nm. Reconnect the wire harness and battery cable.