How to Service and Repair the Rear Brake Line on 2004 Chrysler Crossfire?

Before starting to service or repair the rear brake hose, raise and hold up the vehicle and take off the wheel and tire. Separate the brake hose from the connection on the brake line and after that, take out the hose from the caliper. When you install the new brake hose, attach it to the brake connection, go behind the rear shock and link it to the caliper. When you are done, mount the wheel/tire combo, get the vehicle back on the ground and bleed all the brake lines. Be careful not to let brake fluid touch your car's paint, because it could cause serious harm.

OEM 2004 Chrysler Crossfire Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Lines found

View related parts
2004 Chrysler Crossfire Flex Hose, Rear Part Number: 5099245AA
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Rear; Brake Hose; Brake Line; Hose Brake; Hydraulic Hose
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.4 x 0.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099245AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2004 Chrysler Crossfire Flex Hose, Front Part Number: 68064313AA
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Front, Rear; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Replaces: 5099183AA, 68025215AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 17.2 x 0.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68064313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

2004 Chrysler Crossfire Brake Line Parts and Q&A

Q: How to Service and Repair the Rear Brake Line on 2004 Chrysler Crossfire?
A: Before starting to service or repair the rear brake hose, raise and hold up the vehicle and take off the wheel and tire. Separate the brake hose from the connection on the brake line and after that, take out the hose from the caliper. When you install the new brake hose, attach it to the brake connection, go behind the rear shock and link it to the caliper. When you are done, mount the wheel/tire combo, get the vehicle back on the ground and bleed all the brake lines. Be careful not to let brake fluid touch your car's paint, because it could cause serious harm.