How to Maintain a Rear Wheel Speed Sensor on 2004 Chrysler Crossfire?

Unbolt the wheel speed sensor from the rear knuckle and then remove it from its position in the knuckle. Pull out the rubber grommet and then remove the wheel speed sensor wire harness from its hook. Take off the wheel speed sensor harness connector from the battery tray. Attach the wheel speed sensor wire harness connector, put the rubber grommet inside the car body and hook the wire harness on to the mount. When that's done, the wheel speed sensor should be attached to the knuckle and locked into place with a bolt tightened to 12 Nm (106 inch lbs.).

OEM 2004 Chrysler Crossfire Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Speed Sensors found

View related parts
2004 Chrysler Crossfire ABS Sensor, Front Passenger Side Part Number: 5099908AA
$178.56 MSRP: $265.00
You Save: $86.44 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wiring - Wheel Speed; ABS Wheel Speed Sensor, Front Right; Front Speed Sensor; Sensor Wheel Speed
- Position: Front Passenger Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 7.3 x 4.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099908AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2004 Chrysler Crossfire ABS Sensor, Rear Passenger Side Part Number: 5099913AA
$221.85 MSRP: $294.00
You Save: $72.15 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wiring - Wheel Speed; ABS Wheel Speed Sensor, Rear Right; Rear Speed Sensor; Sensor Wheel Speed
- Position: Rear Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 7.6 x 7.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099913AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2004 Chrysler Crossfire ABS Sensor, Front Driver Side Part Number: 5099909AA
$138.75 MSRP: $175.89
You Save: $37.14 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wiring - Wheel Speed; ABS Wheel Speed Sensor, Front Left; Front Speed Sensor; Sensor Wheel Speed
- Position: Front Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 11.1 x 7.7 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099909AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2004 Chrysler Crossfire ABS Sensor, Rear Driver Side Part Number: 5099912AA
Product Specifications
- Other Name: Wiring - Wheel Speed; ABS Wheel Speed Sensor, Rear Left; Rear Speed Sensor; Sensor Wheel Speed
- Position: Rear Driver Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.3 x 3.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099912AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2004 Chrysler Crossfire Speed Sensor Parts and Q&A

Q: How to Maintain a Rear Wheel Speed Sensor on 2004 Chrysler Crossfire?
A: Unbolt the wheel speed sensor from the rear knuckle and then remove it from its position in the knuckle. Pull out the rubber grommet and then remove the wheel speed sensor wire harness from its hook. Take off the wheel speed sensor harness connector from the battery tray. Attach the wheel speed sensor wire harness connector, put the rubber grommet inside the car body and hook the wire harness on to the mount. When that's done, the wheel speed sensor should be attached to the knuckle and locked into place with a bolt tightened to 12 Nm (106 inch lbs.).