How to Service the Rear Brake Line on 2005 Chrysler Crossfire?

Before servicing the rear brake hose, raise and hold up your vehicle and take off the wheel and tire assembly. Release the hose from its link to the brake line, then pull it out from beneath the caliper. For the installation, connect the brake hose to the fitting on the brake line, feed it behind the shock and link it to the caliper. Replace the wheel and tire, allow the car to sit on all four wheels and start bleeding and refilling the brake system. Make sure not to get brake fluid on your car's paint, because it can be harmful.

OEM 2005 Chrysler Crossfire Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Lines found

View related parts
2005 Chrysler Crossfire Flex Hose, Rear Part Number: 5099245AA
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Rear; Brake Hose; Brake Line; Hose Brake; Hydraulic Hose
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.4 x 0.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099245AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Flex Hose, Front Part Number: 68064313AA
Product Specifications
- Other Name: Line - Brake; Brake Hydraulic Hose, Front, Rear; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Replaces: 5099183AA, 68025215AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 17.2 x 0.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68064313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS

2005 Chrysler Crossfire Brake Line Parts and Q&A

Q: How to Service the Rear Brake Line on 2005 Chrysler Crossfire?
A: Before servicing the rear brake hose, raise and hold up your vehicle and take off the wheel and tire assembly. Release the hose from its link to the brake line, then pull it out from beneath the caliper. For the installation, connect the brake hose to the fitting on the brake line, feed it behind the shock and link it to the caliper. Replace the wheel and tire, allow the car to sit on all four wheels and start bleeding and refilling the brake system. Make sure not to get brake fluid on your car's paint, because it can be harmful.