OEM 2004 Chrysler Crossfire Coolant Reservoir

2004 Chrysler Crossfire Coolant Reservoir Parts and Q&A

• Q: How to Maintain a Coolant Reservoir on 2004 Chrysler Crossfire?

  A: To maintain the coolant reservoir, you should first take off the battery's negative cable and drain some liquid from the cooling system. After that, separate the coolant hose from the radiator, remove the coolant level sensor harness connector from the coolant recovery reservoir and take off the coolant overflow hose. Take out the two nuts holding the coolant reservoir, then raise the reservoir out of the engine area. To mount the coolant recovery reservoir, put it in its original place beneath the hood and secure the two nuts, turning them to 5 Nm (44 in. lbs.). Link the coolant overflow hose, the coolant level sensor harness connector and the radiator coolant hose. Fill the engine cooling system, start the engine, check for leaks, check the coolant again and reattach the negative battery cable.