OEM 2004 Chrysler Crossfire Wiper Motor

2004 Chrysler Crossfire Wiper Motor Parts and Q&A

• Q: How to Maintain and Fix a Wiper Motor on 2004 Chrysler Crossfire?

  A: For any service or repair of the wiper motor, first remove the negative battery cable and detach the wiper module from your car. After that, unfasten the attachment nut on the wiper motor shaft and draw a line on the wiper module as well as the crank arm for future placement. First, detach the crank arm from the wiper motor shaft, then disconnect the three attachment bolts of the wiper motor from the wiper module and finally remove the motor from the kit. Before installing anything, make certain that the wiper motor shaft is in the park setting. Transfer the wiper motor into the wiper motor module, put on the three attachment bolts and tighten them to 11 Nm. Position the wiper motor crank arm above the wiper motor shaft in park and hold it while you press it downwards. After that, secure the crank arm with its attachment nut tightened to 26 Nm. Then install the wiper motor module back into the car.