Other Name: Arm - Upper Control; Suspension Control Arm, Rear Upper; Arm Upper Control Rear; Suspension Control Arm; Control Arm
Position: Rear Upper
Item Weight: 4.50 Pounds
Item Dimensions: 21.4 x 2.4 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52113278AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
Other Name: Arm - Lower Control; Suspension Control Arm, Rear Left Lower; Arm Lower Control Rear; Suspension Control Arm; Control Arm
Position: Rear Lower Driver Side
Item Weight: 5.90 Pounds
Item Dimensions: 31.2 x 2.8 x 2.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52855382AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2004 Dodge Durango Control Arm Parts and Q&A
Q: How to Install and Service a Control Arm on 2004 Dodge Durango?
A: Align the top control arm (3) with the brackets on the frame (1 & 2), secure them with bolts and torqued them to 102 Nm (75 ft. lbs.). After that, slide the ball joint into the steering knuckle and tighten its nut to 75 Nm (55 ft. lbs.). After that, mount the wheel and tire assembly, lower the support and bring the vehicle down to the floor. After all that, align your wheels.