How to Remove and Service a Lower Control Arm on 2005 Dodge Durango?

The lower control arm is secured below the vehicle, so first raise the vehicle and remove the wheel and tire. After that, remove the disc brake caliper assembly and the disc brake rotor from the bike. Loosen the wheel speed sensor at the wheel well and the tie rod from the knuckle with special tool 8677. On 4X4 models, take out the front halfshaft nut, then remove the upper ball joint nut and separate the upper ball joint from the steering knuckle by using Remover 8677. Take out the ball joint nut from the bottom and split the ball joint from the steering knuckle by using Remover 8677. With special tool 8686, release the pressure on the torsion bar after removing the steering knuckle and then remove it from the vehicle. Get rid of the stabilizer bar link and the shock absorber lower bolt, before removing the front and rear pivot bolts. Lastly, take out the lower control arm from the vehicle.

OEM 2005 Dodge Durango Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Control Arms found

View related parts
2005 Dodge Durango Upper Control Arm, Rear Part Number: 52113278AA
$106.37 MSRP: $165.00
You Save: $58.63 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Upper Control; Suspension Control Arm, Rear Upper; Arm Upper Control Rear; Suspension Control Arm; Control Arm
- Position: Rear Upper
- Item Weight: 4.50 Pounds
- Item Dimensions: 21.4 x 2.4 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52113278AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Lower Control Arm, Front Driver Side Part Number: 52113209AB
$680.99 MSRP: $781.00
You Save: $100.01 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Front Left Suspension Control Arm and Ball Joint Assembly.; Arm Lower Control Front; Control Arm
- Position: Front Lower Driver Side
- Item Weight: 34.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52113209AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Lower Control Arm, Front Passenger Side Part Number: 52113208AB
$700.65 MSRP: $804.00
You Save: $103.35 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Front Right Suspension Control Arm and Ball Joint Assembly.; Arm Lower Control Front; Control Arm
- Position: Front Lower Passenger Side
- Item Weight: 33.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52113208AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Lower Control Arm, Rear Passenger Side Part Number: 52113275AD
$119.47 MSRP: $184.00
You Save: $64.53 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm, Rear Lower, Rear Right Lower; Arm Lower Control Rear; Suspension Control Arm; Control Arm
- Position: Rear Lower Passenger Side
- Replaces: 52113275AA, 52113275AB, 52113275AC
- Item Weight: 6.00 Pounds
- Item Dimensions: 31.2 x 2.8 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52113275AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Upper Control Arm, Front Part Number: 52106577AI
Product Specifications
- Other Name: Arm - Upper Control; Front Upper Suspension Control Arm and Ball Joint Assembly.; Bushings
- Position: Front Upper
- Replaces: 52106577AB, 52106577AA, 52106577AD, 52106577AF, 52106577AH, 52106580AB, 52106577AE, 52106577AC
- Item Weight: 3.20 Pounds
- Item Dimensions: 5.0 x 11.8 x 14.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52106577AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Durango Lower Control Arm, Rear Driver Side Part Number: 52855382AA
Product Specifications
- Other Name: Arm - Lower Control; Suspension Control Arm, Rear Left Lower; Arm Lower Control Rear; Suspension Control Arm; Control Arm
- Position: Rear Lower Driver Side
- Item Weight: 5.90 Pounds
- Item Dimensions: 31.2 x 2.8 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52855382AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2005 Dodge Durango Control Arm Parts and Q&A

Q: How to Remove and Service a Lower Control Arm on 2005 Dodge Durango?
A: The lower control arm is secured below the vehicle, so first raise the vehicle and remove the wheel and tire. After that, remove the disc brake caliper assembly and the disc brake rotor from the bike. Loosen the wheel speed sensor at the wheel well and the tie rod from the knuckle with special tool 8677. On 4X4 models, take out the front halfshaft nut, then remove the upper ball joint nut and separate the upper ball joint from the steering knuckle by using Remover 8677. Take out the ball joint nut from the bottom and split the ball joint from the steering knuckle by using Remover 8677. With special tool 8686, release the pressure on the torsion bar after removing the steering knuckle and then remove it from the vehicle. Get rid of the stabilizer bar link and the shock absorber lower bolt, before removing the front and rear pivot bolts. Lastly, take out the lower control arm from the vehicle.