How to Remove and Install a Knock Sensor in the Cylinder Block on 2004 Dodge Durango?

The two knock sensors are under the intake manifold at the LEFT marked and have larger bolts which are used to fix them. It is important that sensors be properly positioned. Removal To remove, disconnect the harness, remove the manifold and unscrew the sensors without adhesives. Wipe off the holes, fit the sensors and adhere to torque requirements before re-assembling.

OEM 2004 Dodge Durango Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2004 Dodge Durango Knock Sensor Part Number: 5033316AB
$128.23 MSRP: $194.00
You Save: $65.77 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; MAP Sensor; Sensor Knock
- Replaces: 5033316AA, 56028563AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.3 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5033316AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Citadel, Crew, GT, Limited, Limited Hybrid, Pursuit, R/T, R/T Hemi Orange, R/T Plus, R/T Premium, SE, SLT, SRT, SRT 392, SRT 392 Plus, SRT 392 Premium, ST, SXT, Special Service | 5.7L V8, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
2004 Dodge Durango Knock Sensor Part Number: 56041679AC
Product Specifications
- Other Name: Sensor - Knock; Ignition Knock (Detonation) Sensor; Map Sensor; Sensor Knock
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.0 x 3.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041679AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- SLT, ST, SXT | 6 Cyl 3.7 L GAS

2004 Dodge Durango Knock Sensor Parts and Q&A

Q: How to Remove and Install a Knock Sensor in the Cylinder Block on 2004 Dodge Durango?
A: The two knock sensors are under the intake manifold at the LEFT marked and have larger bolts which are used to fix them. It is important that sensors be properly positioned. Removal To remove, disconnect the harness, remove the manifold and unscrew the sensors without adhesives. Wipe off the holes, fit the sensors and adhere to torque requirements before re-assembling.