How to Effectively Service and Replace a MAP Sensor on 2004 Dodge Durango?

Located at the front of the intake manifold, the Manifold Absolute Pressure (MAP) sensor should be handled with care during any service or repair job. Before removing the sensor, disconnect the connector, then wipe away any dirt around the area. Following that, open the two sensor mounting screws and carefully take the MAP sensor off the intake manifold to inspect the condition of the O-ring. Before installing, look inside the hole of the intake manifold for the MAP sensor and examine the O-ring to see if it has been cut or torn. Attach the sensor to the manifold, tighten the mounting screws to 3 N.m (25 in. lbs.) and join the electrical connector back.

OEM 2004 Dodge Durango MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2004 Dodge Durango M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Limited, SE, SLT, SLT Plus, ST, SXT, Sport | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Durango M.A.P. Sensor Part Number: 56028562AB
$31.84 MSRP: $45.80
You Save: $13.96 (31%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 1.6 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028562AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Limited, SLT, ST | 8 Cyl 5.7 L GAS

2004 Dodge Durango MAP Sensor Parts and Q&A

Q: How to Effectively Service and Replace a MAP Sensor on 2004 Dodge Durango?
A: Located at the front of the intake manifold, the Manifold Absolute Pressure (MAP) sensor should be handled with care during any service or repair job. Before removing the sensor, disconnect the connector, then wipe away any dirt around the area. Following that, open the two sensor mounting screws and carefully take the MAP sensor off the intake manifold to inspect the condition of the O-ring. Before installing, look inside the hole of the intake manifold for the MAP sensor and examine the O-ring to see if it has been cut or torn. Attach the sensor to the manifold, tighten the mounting screws to 3 N.m (25 in. lbs.) and join the electrical connector back.