How to service an Oil Pressure Switch on 2004 Dodge Durango?

You should remove the negative battery cable and put the vehicle up on a hoist before servicing the oil pressure sender. After the front splash shield is off, disconnect the connector from the oil pressure sender and take out the sender. You should begin by putting in the new oil pressure sender and attaching the oil pressure sender wire for installation. Attach the front splash shield, raise the car and then link the negative battery cable.

OEM 2004 Dodge Durango Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2004 Dodge Durango Oil Pressure Sending Unit Part Number: 5149064AB
$63.23 MSRP: $85.70
You Save: $22.47 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Sensor; Engine Oil Pressure Switch; Oil Pressure Switch; Sending Unit Oil Pressure
- Replaces: 5149064AA, 5093908AA, 56028807AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 1.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149064AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Limited, R/T, SLT, SLT Plus, ST, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2004 Dodge Durango Oil Pressure Sending Unit Part Number: 4868672AA
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Oil Pressure Switch; Switch Oil Pressure
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 1.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4868672AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2004 Dodge Durango Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2004 Dodge Durango?
A: You should remove the negative battery cable and put the vehicle up on a hoist before servicing the oil pressure sender. After the front splash shield is off, disconnect the connector from the oil pressure sender and take out the sender. You should begin by putting in the new oil pressure sender and attaching the oil pressure sender wire for installation. Attach the front splash shield, raise the car and then link the negative battery cable.