How to Maintain a Seat Heater Switch on 2004 Dodge Durango?

The first step in repairing the heated seat switch is to disconnect and seperate the negative battery cable. Lift up the instrument panel bezel at the middle and then get rid of the switch bezel and both buttons together. Carefully get the switch out from the back of the switch bezel and push on the heated seat switch until it comes through the bezel on the other side. To install, make sure the fronts of the heated seat switches match the holes in the bezel, because you can see a small keyway on the back of each switch connector. Set the heated seat switch into the center of the rear part of the bezel, place the middle bezel over the instrument panel, connect the battery cable again and test if the heated seat works.

OEM 2004 Dodge Durango Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heater Switches found

View related parts
2004 Dodge Durango Seat Switch, Center Passenger Side Part Number: 56045626AB
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Center Right, Right; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Center Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045626AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Durango Seat Switch, Driver Side Part Number: 56045625AB
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Center Left, Left; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.8 x 2.7 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045625AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2004 Dodge Durango Seat Heater Switch Parts and Q&A

Q: How to Maintain a Seat Heater Switch on 2004 Dodge Durango?
A: The first step in repairing the heated seat switch is to disconnect and seperate the negative battery cable. Lift up the instrument panel bezel at the middle and then get rid of the switch bezel and both buttons together. Carefully get the switch out from the back of the switch bezel and push on the heated seat switch until it comes through the bezel on the other side. To install, make sure the fronts of the heated seat switches match the holes in the bezel, because you can see a small keyway on the back of each switch connector. Set the heated seat switch into the center of the rear part of the bezel, place the middle bezel over the instrument panel, connect the battery cable again and test if the heated seat works.