How to Replace the Passenger Seat Heater Switch on 2003 Dodge Durango?

Cut off the car's battery negative cable prior to doing anything for your safety. Use a small flat bladed pry tool to partially lift the lower right side edge of the seat heater switch from its spot in the center console. Move the string for the heated seat switch far enough that you can unplug the center console wire harness connector from the switch's back and then remove the switch from the console. When installing, connect the wires from the center console to the switch on the back, mount the switch in the center console hole and finish with a reconnection of the negative battery cable.

OEM 2003 Dodge Durango Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Seat Heater Switches found

View related parts
2003 Dodge Durango Switch Part Number: 56045099AB
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Switch Heated Seat
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045099AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Durango Submodels:
- R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Switch Part Number: 56045098AB
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch; Switch Heated Seat
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Durango Submodels:
- R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Seat Switch, Passenger Side Part Number: 56045098AA
Product Specifications
- Other Name: Heated Seat; Seat Heater Switch, Right; Switch Heated Seat
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.7 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045098AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Seat Switch, Driver Side Part Number: 56045099AA
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Left; Switch Heated Seat
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045099AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Durango Seat Heater Switch Parts and Q&A

Q: How to Replace the Passenger Seat Heater Switch on 2003 Dodge Durango?
A: Cut off the car's battery negative cable prior to doing anything for your safety. Use a small flat bladed pry tool to partially lift the lower right side edge of the seat heater switch from its spot in the center console. Move the string for the heated seat switch far enough that you can unplug the center console wire harness connector from the switch's back and then remove the switch from the console. When installing, connect the wires from the center console to the switch on the back, mount the switch in the center console hole and finish with a reconnection of the negative battery cable.