How to Maintain a Power Window Switch on 2005 Dodge Neon?

Before servicing the power window switch, make sure you disconnect and isolate the negative battery cable. Using a car trim stick (or an equivalent), carefully lift the bezel around the window switch from the door panel. Remove the nearby wire connector from the switch and then take out the two screws that help support the switch. Set up by first installing the retaining screws for the switch, then link the wire connector back to the switch. Replace the switch in the trim panel and connect the negative battery cable last.

OEM 2005 Dodge Neon Power Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Window Switches found

View related parts
2005 Dodge Neon Window Switch, Passenger Side Part Number: 4793859AA
$25.80 MSRP: $55.50
You Save: $29.70 (54%)
ADD TO CART
Product Specifications
- Other Name: Switch - Power Window; Door Window Switch, Right; Switch Power Window; Door Window Switch
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793859AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Neon Window Switch Part Number: 4793858AA
Product Specifications
- Other Name: Switch - Power Window; Switch Power Window
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793858AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2005 Dodge Neon Power Window Switch Parts and Q&A

Q: How to Maintain a Power Window Switch on 2005 Dodge Neon?
A: Before servicing the power window switch, make sure you disconnect and isolate the negative battery cable. Using a car trim stick (or an equivalent), carefully lift the bezel around the window switch from the door panel. Remove the nearby wire connector from the switch and then take out the two screws that help support the switch. Set up by first installing the retaining screws for the switch, then link the wire connector back to the switch. Replace the switch in the trim panel and connect the negative battery cable last.