How to Service an Air Bag Control Module for Side Impact on 2004 Dodge Neon?

For Side Impact air bag Control Module servicing, you should open the hood and unplug the battery negative cable to keep the module isolated. Let the system reserve capacitor discharge for two minutes before you continue. On the side of the door where the window is, take off the sill trim and then remove the carpet to find the retaining screws. Unscrew the two Siacm retaining screws and separate the module's electrical connector before you remove it from the vehicle. You should install the Siacm electrical connector, set the module under the front door sill and tighten the retaining screws to 15 Nm (135 in. lbs.). Fit the door sill trim back onto the right side of the doorway. air bag testing should be performed before the negative battery cable is connected to avoid harm. Last, close the bonnet and see if everything is working well.

OEM 2004 Dodge Neon Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Air Bag Control Modules found

View related parts
2004 Dodge Neon Side Impact Sensor, Passenger Side Part Number: 5293230AF
Product Specifications
- Other Name: Module - Side Impact Right; Air Bag Impact Sensor, Right; Air Bag Sensor; Side Impact Inflator Module; Module Side Impact Right
- Position: Passenger Side
- Replaces: 5293230AE, 5293230AD
- Item Weight: 1.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5293230AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Neon Submodels:
- ACR, Base, ES, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2004 Dodge Neon Side Impact Sensor, Driver Side Part Number: 5293231AF
Product Specifications
- Other Name: Module - Side Impact Left; Air Bag Impact Sensor, Left; Air Bag Sensor; Side Impact Inflator Module; Module Side Impact Left
- Position: Driver Side
- Replaces: 5293231AE
- Item Weight: 1.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5293231AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Neon Submodels:
- ACR, Base, ES, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2004 Dodge Neon Control Module Part Number: 5084086AC
Product Specifications
- Other Name: Module - Air Bag Control; Module Air Bag Control
- Replaces: 5084086AB
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5084086AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Neon Submodels:
- R/T, SE, SRT-4, SXT | 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2004 Dodge Neon Control Module Part Number: 5084085AC
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; Module Air Bag Control
- Replaces: 5084085AB
- Item Weight: 1.50 Pounds
- Item Dimensions: 5.1 x 5.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5084085AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Neon Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2004 Dodge Neon Air Bag Control Module Parts and Q&A

Q: How to Service an Air Bag Control Module for Side Impact on 2004 Dodge Neon?
A: For Side Impact air bag Control Module servicing, you should open the hood and unplug the battery negative cable to keep the module isolated. Let the system reserve capacitor discharge for two minutes before you continue. On the side of the door where the window is, take off the sill trim and then remove the carpet to find the retaining screws. Unscrew the two Siacm retaining screws and separate the module's electrical connector before you remove it from the vehicle. You should install the Siacm electrical connector, set the module under the front door sill and tighten the retaining screws to 15 Nm (135 in. lbs.). Fit the door sill trim back onto the right side of the doorway. air bag testing should be performed before the negative battery cable is connected to avoid harm. Last, close the bonnet and see if everything is working well.