How to Service and Repair a Driveshaft Center Support Bearing on 2004 Dodge Ram 2500?

To replace the driveshaft center support bearing, loosen the rear propeller shaft and propeller slip joint boot clamp. Detach the slinger using a hammer and punch and press off the bearing. Install new bearing and slinger, grease the splines and reassemble the shafts and propeller shaft.

OEM 2004 Dodge Ram 2500 Driveshaft Center Support Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Driveshaft Center Support Bearing found

View related parts
2004 Dodge Ram 2500 Center Bearing Part Number: 5014097AA
$191.48 MSRP: $284.00
You Save: $92.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Drive Shaft; Drive Shaft Center Support Bearing; Driveshaft Center Support Bearing; Center Support Bearing; Center Bearing Drive Shaft; Bearing Kit Drive Shaft
- Item Weight: 3.80 Pounds
- Item Dimensions: 3.5 x 7.8 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5014097AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2004 Dodge Ram 2500 Driveshaft Center Support Bearing Parts and Q&A

Q: How to Service and Repair a Driveshaft Center Support Bearing on 2004 Dodge Ram 2500?
A: To replace the driveshaft center support bearing, loosen the rear propeller shaft and propeller slip joint boot clamp. Detach the slinger using a hammer and punch and press off the bearing. Install new bearing and slinger, grease the splines and reassemble the shafts and propeller shaft.