JeepParts
My Garage
My Account
Cart
OEM 2004 Jeep Grand Cherokee Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Alternators found
2004 Jeep Grand Cherokee Alternator Part Number: 56041693AC
Product Specifications- Other Name: Alternator - Engine; Alternators; Generator Engine
- Replaces: 56041693AB
- Item Weight: 15.60 Pounds
- Item Dimensions: 10.7 x 10.0 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041693AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Jeep Grand Cherokee Alternator Part Number: RL041120AC
Product Specifications- Other Name: Alternator - Engine
- Replaces: 56041120AB, RL041120AB, 56041120AC
- Item Weight: 20.10 Pounds
- Item Dimensions: 10.0 x 10.0 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: RL041120AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Jeep Grand Cherokee Alternator Part Number: 56044678AA
Product Specifications- Other Name: Alternator - Engine; Alternators
- Item Weight: 15.70 Pounds
- Item Dimensions: 10.7 x 10.0 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56044678AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Jeep Grand Cherokee Alternator Parts and Q&A
- Q: How to Effectively Service and Repair an Alternator on 2004 Jeep Grand Cherokee?A: Be sure to remove the negative battery cable before trying to service or repair the alternator. Following the instructions for the Cooling System, remove the generator drive belt. Open the cable protector cover on the B+ stud and separate the 2-wire connection at the generator's back. After that, use the bolts meant for the engine to remove the generator from the car. To mount the generator, place it at the engine and put in the bolts to hold it there, tightening each as specified: the vertical mounting bolt for the 4.7L at 40 Nm (29 ft. lbs.), long horizontal one for the 4.7L at 55 Nm (41 ft. lbs.), short horizontal one for the 4.7L at 55 Nm (41 ft. lbs.), the rest for the 4.0L at 55 Nm (41 ft. lbs.) and B+ terminal Fasten the 2-wire field connector into the back of the generator and put the cable protector cover over the B+ mounting stud. Never use a screwdriver to help a belt over a pulley rim, because it could harm the fiber of the synthetic belt and make sure the serpentine accessory drive belt is routed properly so the water pump doesn't rotate the wrong way and cause engine overheating. Afterwards, set the generator drive belt in place and attach the negative battery cable again.
Related 2004 Jeep Grand Cherokee Parts
2004 Jeep Grand Cherokee Starter Motor
2004 Jeep Grand Cherokee Alternator Bracket
2004 Jeep Grand Cherokee Battery Cable
2004 Jeep Grand Cherokee Battery Tray
2004 Jeep Grand Cherokee Car Batteries