Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2004 Jeep Grand Cherokee Ball Joint

Control Arm Joint
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ball Joints found

  • 2004 Jeep Grand Cherokee Ball Joint - 68004085AA
    2004 Jeep Grand Cherokee Ball Joint - 68004085AA
    2004 Jeep Grand Cherokee Ball Joint - 68004085AA
    2004 Jeep Grand Cherokee Ball Joint - 68004085AA
    2004 Jeep Grand Cherokee Ball Joint - 68004085AA
    2004 Jeep Grand Cherokee Ball Joint Diagram - 68004085AA
    View related parts

    2004 Jeep Grand Cherokee Ball Joint Part Number: 68004085AA

    $282.12 MSRP: $418.00
    You Save: $135.88 (33%)
    Product Specifications
    • Other Name: Ball Join - Knuckle; Suspension Ball Joint Kit; Suspension Ball Joint; Telescopic Ball Joint; Ball Joints; Ball Joint Kit Knuckle
    • Item Weight: 2.30 Pounds
    • Item Dimensions: 2.4 x 5.2 x 5.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68004085AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2004 Jeep Grand Cherokee Submodels:
    • Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
  • 2004 Jeep Grand Cherokee Ball Joint - 52088808AB
    2004 Jeep Grand Cherokee Ball Joint - 52088808AB
    2004 Jeep Grand Cherokee Ball Joint - 52088808AB
    2004 Jeep Grand Cherokee Ball Joint Diagram - 52088808AB
    View related parts

    2004 Jeep Grand Cherokee Ball Joint, Rear Upper Part Number: 52088808AB

    Product Specifications
    • Other Name: Balljoint - Upper Control Arm; Suspension Ball Joint, Rear; Ball Joint Assembly Upper Control Arm Rear; Suspension Ball Joint
    • Position: Rear Upper
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 7.1 x 5.4 x 4.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52088808AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2004 Jeep Grand Cherokee Submodels:
    • Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2004 Jeep Grand Cherokee Ball Joint Parts and Q&A

  • Q: How to Service and Repair a Rear Suspension Ball Joint on 2004 Jeep Grand Cherokee?
    A: First, lift and support the vehicle and then support the rear axle using a hydraulic jack for the service. Loosen the ball joint nut at the top of the upper arm, then tug the ball joint out with Remover 8278 and hit the upper control arm with a hammer if you must. After that, remove the bolts holding the ball joint mounting to the differential housing and take the ball joint from the housing. Install the ball joint by fitting it onto the differential housing and hold it in place with the bolts, tightening these to 136 Nm (100 ft. lbs.). Hold the rear end up using the jack to ensure the upper arm is flat with the ball joint. Then, attach the arm to the rod on the stud by pulling and screw tight a new bolt to 142 Nm (105 ft. lbs.). At the last stage, take away the supports and gently move the vehicle down.

Related 2004 Jeep Grand Cherokee Parts

Alternate Year Models

+
2003 Jeep Grand Cherokee Ball Joint 2005 Jeep Grand Cherokee Ball Joint