Other Name: Spring - Front Coil; Coil Spring, Front; Coil Springs; Spring Front Coil
Position: Front
Condition: New
Fitment Type: Direct Replacement
SKU: 52080399AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
Fits the following 2004 Jeep Grand Cherokee Submodels:
Laredo, Limited, Overland, Special Edition | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
2004 Jeep Grand Cherokee Coil Springs Parts and Q&A
Q: How to Service Rear Coil Springs on 2004 Jeep Grand Cherokee?
A: Service the rear coil spring by raising the vehicle and after that, place a hydraulic jack under the axle. Remove both the wheel and tire assembly and the stabilizer bar link from the stabilizer bar and then take off the shock absorber's last bolt from the axle bracket. Unload the hydraulic jack, tilt the axle, pull the coil spring and look at the spring isolators at both ends. To set up the isolators, begin with the upper isolator, next the lower one so the isolator locator nub fits through the axle pad hole. Pull the axle down and insert the coil spring over the lower isolator, so the end of the spring coil is against the isolator spring locator. Raise the axle using the jack and set the shock absorber onto the axle bracket, making certain it is tightened properly. Fit the stabilizer bar link onto the stabilizer bar, install the wheels and tires, remove the supports and bring the car down. You should then tighten the stabilizer bar links according to the vehicle manufacturer's specifications.