How to Service and Repair a Throttle Position Sensor on a 4.0L Engine on 2004 Jeep Grand Cherokee?

Remove the electrical connector from the TPS and take out the two mounting screws to detach the TPS for later service of the 4.0L engine. When installing, snap the throttle shaft into the TPS socket and allow it to spin slightly; if the sensor doesn't twist, replace it with the throttle shaft pointing at the other set of tangs inside the socket. The TPS will feel a bit of tension when rotated. Affix the TPS and secure it in place with the retaining screws, but don't tighten them tighter than 7 N.m (60 in. lbs.) torque. After that, connect the TPS electrical connector and move the throttle manually to see if the TPS is binding before you start the engine.

OEM 2004 Jeep Grand Cherokee Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Position Sensors found

View related parts
2004 Jeep Grand Cherokee Throttle Position Sensor Part Number: 68404428AA
$61.51 MSRP: $85.05
You Save: $23.54 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor
- Replaces: 5019411AD, 5019411AB, 5019411AC
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.0 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68404428AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited, Special Edition, Sport | 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Jeep Grand Cherokee Throttle Position Sensor Part Number: 5017479AA
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Throttle Sensor; Sensor Kit Throttle Position
- Replaces: 4882219
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.9 x 2.7 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017479AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- 5.9 Limited, 65th Anniversary Edition, Laredo, Limited, Orvis, Overland, Special Edition, Sport, TSi | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2004 Jeep Grand Cherokee Throttle Position Sensor Parts and Q&A

Q: How to Service and Repair a Throttle Position Sensor on a 4.0L Engine on 2004 Jeep Grand Cherokee?
A: Remove the electrical connector from the TPS and take out the two mounting screws to detach the TPS for later service of the 4.0L engine. When installing, snap the throttle shaft into the TPS socket and allow it to spin slightly; if the sensor doesn't twist, replace it with the throttle shaft pointing at the other set of tangs inside the socket. The TPS will feel a bit of tension when rotated. Affix the TPS and secure it in place with the retaining screws, but don't tighten them tighter than 7 N.m (60 in. lbs.) torque. After that, connect the TPS electrical connector and move the throttle manually to see if the TPS is binding before you start the engine.