How to Service a MAP Sensor on 2004 Jeep Grand Cherokee?

Before servicing the manifold pressure/vacuum sensor, take off the air cleaner duct and air resonator box connected to the throttle body. After that, remove the MAP sensor mounting bolt and gently slide the rubber L-shaped fitting off the throttle body as you take out the MAP sensor. To install, snap on the rubber fitting to the MAP sensor and then place the sensor on the throttle body, making sure the rubber part goes over the throttle body vacuum nipple. Do this by attaching the MAP sensor bracket with the mounting bolt and tightening it to torque 3 N.m (25 in. lbs.) After that, replace the air cleaner duct and air box.

OEM 2004 Jeep Grand Cherokee MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2004 Jeep Grand Cherokee M.A.P. Sensor Part Number: 68002763AA
$112.00 MSRP: $167.00
You Save: $55.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.0 x 2.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68002763AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2004 Jeep Grand Cherokee M.A.P. Sensor Part Number: 56044545AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor
- Replaces: 56044545AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56044545AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Special Edition | 4.0L V6, 6 Cyl 4.0 L GAS

2004 Jeep Grand Cherokee MAP Sensor Parts and Q&A

Q: How to Service a MAP Sensor on 2004 Jeep Grand Cherokee?
A: Before servicing the manifold pressure/vacuum sensor, take off the air cleaner duct and air resonator box connected to the throttle body. After that, remove the MAP sensor mounting bolt and gently slide the rubber L-shaped fitting off the throttle body as you take out the MAP sensor. To install, snap on the rubber fitting to the MAP sensor and then place the sensor on the throttle body, making sure the rubber part goes over the throttle body vacuum nipple. Do this by attaching the MAP sensor bracket with the mounting bolt and tightening it to torque 3 N.m (25 in. lbs.) After that, replace the air cleaner duct and air box.