How to Service and Repair a Front Door Latch Assembly on 2004 Jeep Liberty?

The first thing you should do is remove and separate the negative cable from the battery when fixing the front latch. Sometimes the waterdam gets in the way, so take it out if needed. Remove the bolts (2) from the rear glass run channel and put the channel somewhere safe while you work. First, disconnect the exterior handle rod, then remove the lock knob rod (1) and link the lock cylinder rod to the latch. Reach the five screws (5) and take the latch (3) out and finally disconnect the electrical connectors. To install, hook the latch connectors up, fit the latch assembly (3) into the door (4) and tighten the assembly with the screws (5) to 11 N.m (95 in.lbs.). Reattach the lock cylinder link rod to the latch and the lock knob rod to the lock and finally hook the exterior handle rod to the end of the handle. Fit and fasten the two rear glass channelling bolts to 9 N.m (80 in.lbs.), place and fit the waterdam and link the rear battery ground cable again.

OEM 2004 Jeep Liberty Door Latch Assembly

Door Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Door Latch Assemblys found

View related parts
2004 Jeep Liberty Lock, Front Driver Side Part Number: 55177041AJ
$52.92 MSRP: $83.85
You Save: $30.93 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Front Door; Door Latch Assembly, Front Left; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Front Driver Side
- Replaces: 55177041AI, 55177041AG, 55177041AH, 55177041AF
- Item Weight: 2.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55177041AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2004 Jeep Liberty Lock, Rear Driver Side Part Number: 55177045AJ
$86.78 MSRP: $128.00
You Save: $41.22 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Rear Door; Rear Left Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Rear Driver Side
- Replaces: 55177045AI, 55177045AE, 55177045AD, 55177045AG, 55177045AF
- Item Weight: 2.40 Pounds
- Item Dimensions: 29.6 x 6.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55177045AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Sport | 2.4L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2004 Jeep Liberty Lock, Front Driver Side Part Number: 55177043AJ
$109.73 MSRP: $226.00
You Save: $116.27 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Front Door; Front Left Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Front Driver Side
- Replaces: 55177043AF, 55177043AI, 55177043AH
- Item Weight: 3.00 Pounds
- Item Dimensions: 28.7 x 6.2 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55177043AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2004 Jeep Liberty Lock, Rear Passenger Side Part Number: 55177044AJ
$152.73 MSRP: $228.00
You Save: $75.27 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Rear Door; Rear Right Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Rear Passenger Side
- Replaces: 55177044AI, 55177044AE, 55177044AG, 55177044AF, 55177044AD
- Item Weight: 3.40 Pounds
- Item Dimensions: 29.3 x 6.9 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55177044AJ
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2004 Jeep Liberty Lock, Front Passenger Side Part Number: 55360611AF
$173.55 MSRP: $240.00
You Save: $66.45 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch - Front Door; Front Right Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Front Passenger Side
- Replaces: 55360611AE, 55360611AC
- Item Weight: 2.40 Pounds
- Item Dimensions: 29.3 x 7.3 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55360611AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 2.4L L4, 2.8L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2004 Jeep Liberty Lock, Rear Passenger Side Part Number: 55177046AG
Product Specifications
- Other Name: Latch - Rear Door; Door Latch Assembly, Rear Right; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch; Latch Rear Door; Door Latch Assembly
- Position: Rear Passenger Side
- Replaces: 55177046AF, 55177046AD, 55177046AE
- Item Weight: 3.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55177046AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2004 Jeep Liberty Lock, Front Passenger Side Part Number: 55177040AI
Product Specifications
- Other Name: Latch - Front Door; Front Right Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
- Position: Front Passenger Side
- Replaces: 55177040AG, 55177040AF, 55177040AH
- Item Weight: 3.10 Pounds
- Item Dimensions: 30.1 x 7.2 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55177040AI
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- Limited, Renegade, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS
View related parts
2004 Jeep Liberty Lock, Rear Driver Side Part Number: 55177047AG
Product Specifications
- Other Name: Latch - Rear Door; Door Latch Assembly, Rear Left; Door Lock Actuator Motor; Door Lock Actuator; Door Lock; Latch; Latch Rear Door; Door Latch Assembly
- Position: Rear Driver Side
- Replaces: 55177047AD, 55177047AE, 55177047AF
- Item Weight: 2.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55177047AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2004 Jeep Liberty Door Latch Assembly Parts and Q&A

Q: How to Service and Repair a Front Door Latch Assembly on 2004 Jeep Liberty?
A: The first thing you should do is remove and separate the negative cable from the battery when fixing the front latch. Sometimes the waterdam gets in the way, so take it out if needed. Remove the bolts (2) from the rear glass run channel and put the channel somewhere safe while you work. First, disconnect the exterior handle rod, then remove the lock knob rod (1) and link the lock cylinder rod to the latch. Reach the five screws (5) and take the latch (3) out and finally disconnect the electrical connectors. To install, hook the latch connectors up, fit the latch assembly (3) into the door (4) and tighten the assembly with the screws (5) to 11 N.m (95 in.lbs.). Reattach the lock cylinder link rod to the latch and the lock knob rod to the lock and finally hook the exterior handle rod to the end of the handle. Fit and fasten the two rear glass channelling bolts to 9 N.m (80 in.lbs.), place and fit the waterdam and link the rear battery ground cable again.